mic updates

main
Inga 🏳‍🌈 11 months ago
parent baa5c76e8b
commit 7560bdf8bd
  1. 29
      README.md
  2. 2
      dotfiles/.config/river/init
  3. 170
      dotfiles/.config/river/init.bak
  4. 1
      dotfiles/.config/river/sharing-float-one.sh
  5. 9
      dotfiles/.config/river/sharing-float.sh

@ -282,6 +282,8 @@ doas apk add element-desktop
### Sleep
**TODO 2024**
With default settings, laptop goes to sleep after some idle period. When it wakes up, the root fs is readonly, meaning that I have to restart the laptop.
Adding `acpiphp.disable=1` and `pcie_aspm=off` to grub config does not solve the issue.
@ -322,7 +324,7 @@ Otherwise, alpine wiki describes how to configure WiFi using `iwd`.
### Backlight
***TODO 2024**
**TODO 2024**
```
doas apk add light
@ -370,10 +372,8 @@ riverctl input 2:10:TPPS/2_Elan_TrackPoint pointer-accel -0.5
Based on https://wiki.alpinelinux.org/wiki/PipeWire
```
doas apk add pipewire wireplumber rtkit alsa-utils pipewire-alsa
doas addgroup YOURUSER rtkit
doas addgroup root audio
alsamixer
doas apk add pipewire wireplumber rtkit pipewire-alsa
#doas addgroup YOURUSER rtkit
```
Then
@ -398,27 +398,28 @@ riverctl map $mode None XF86AudioMute spawn 'wpctl set-mute @DEFAULT_AUDIO_SINK@
```
Note that the internal microphone does not work and is not detected by pipewire.
(This still holds on P14s G4 in 2024.)
Only external microphones work.
Mic in browser didn't work, but then it started to work at some point,
without me seemingly changing anything.
#### Mic mute button
Create `/etc/acpi/events/lenovo-mutemic` with the following content:
```
event=button/micmute MICMUTE 00000080 00000000 K
action=amixer --card 1 set 'Capture' toggle
doas apk add alsa-tools
```
Add the following to the river config:
```
riverctl map $mode None XF86AudioMicMute spawn 'amixer --card 1 set "Capture" toggle'
```
where card number is the one obtained in previous section; and event could be determined by running `acpi_listen` and pressing mic button.
Then, after `doas rc-service acpid restart`, mic button should control internal mic capture in alsa and switch internal mic led on and off.
(Editing ACPI hooks no longer needed on P14s G4 in 2024.)
### Webcam
Should work after following the steps for "Audio".
Can be tested in https://webrtc.github.io/test-pages
Can be tested in https://webrtc.github.io/samples
## Additional

@ -133,7 +133,7 @@ do
riverctl map -repeat $mode None XF86AudioRaiseVolume spawn "wpctl set-volume -l 1.0 @DEFAULT_AUDIO_SINK@ 1%+"
riverctl map -repeat $mode None XF86AudioLowerVolume spawn "wpctl set-volume -l 1.0 @DEFAULT_AUDIO_SINK@ 1%-"
riverctl map $mode None XF86AudioMute spawn 'wpctl set-mute @DEFAULT_AUDIO_SINK@ toggle'
riverctl map $mode None XF86AudioMicMute spawn 'amixer set "Master" toggle'
riverctl map $mode None XF86AudioMicMute spawn 'amixer --card 1 set "Capture" toggle'
# Control MPRIS aware media players with playerctl (https://github.com/altdesktop/playerctl)
riverctl map $mode None XF86AudioMedia spawn 'playerctl play-pause'

@ -1,170 +0,0 @@
#!/bin/sh
# This is the example configuration file for river.
#
# If you wish to edit this, you will probably want to copy it to
# $XDG_CONFIG_HOME/river/init or $HOME/.config/river/init first.
#
# See the river(1), riverctl(1), and rivertile(1) man pages for complete
# documentation.
riverctl xcursor-theme Adwaita 24
# Note: the "Super" modifier is also known as Logo, GUI, Windows, Mod4, etc.
# Super+Shift+Return to start an instance of foot (https://codeberg.org/dnkl/foot)
riverctl map normal Super+Shift Return spawn foot
# Super+Q to close the focused view
riverctl map normal Super Q close
# Super+Shift+E to exit river
riverctl map normal Super+Shift E exit
# Super+J and Super+K to focus the next/previous view in the layout stack
riverctl map normal Super J focus-view next
riverctl map normal Super K focus-view previous
# Super+Shift+J and Super+Shift+K to swap the focused view with the next/previous
# view in the layout stack
riverctl map normal Super+Shift J swap next
riverctl map normal Super+Shift K swap previous
# Super+Period and Super+Comma to focus the next/previous output
riverctl map normal Super Period focus-output next
riverctl map normal Super Comma focus-output previous
# Super+Shift+{Period,Comma} to send the focused view to the next/previous output
riverctl map normal Super+Shift Period send-to-output next
riverctl map normal Super+Shift Comma send-to-output previous
# Super+Return to bump the focused view to the top of the layout stack
riverctl map normal Super Return zoom
# Super+H and Super+L to decrease/increase the main ratio of rivertile(1)
riverctl map normal Super H send-layout-cmd rivertile "main-ratio -0.05"
riverctl map normal Super L send-layout-cmd rivertile "main-ratio +0.05"
# Super+Shift+H and Super+Shift+L to increment/decrement the main count of rivertile(1)
riverctl map normal Super+Shift H send-layout-cmd rivertile "main-count +1"
riverctl map normal Super+Shift L send-layout-cmd rivertile "main-count -1"
# Super+Alt+{H,J,K,L} to move views
riverctl map normal Super+Alt H move left 100
riverctl map normal Super+Alt J move down 100
riverctl map normal Super+Alt K move up 100
riverctl map normal Super+Alt L move right 100
# Super+Alt+Control+{H,J,K,L} to snap views to screen edges
riverctl map normal Super+Alt+Control H snap left
riverctl map normal Super+Alt+Control J snap down
riverctl map normal Super+Alt+Control K snap up
riverctl map normal Super+Alt+Control L snap right
# Super+Alt+Shif+{H,J,K,L} to resize views
riverctl map normal Super+Alt+Shift H resize horizontal -100
riverctl map normal Super+Alt+Shift J resize vertical 100
riverctl map normal Super+Alt+Shift K resize vertical -100
riverctl map normal Super+Alt+Shift L resize horizontal 100
# Super + Left Mouse Button to move views
riverctl map-pointer normal Super BTN_LEFT move-view
# Super + Right Mouse Button to resize views
riverctl map-pointer normal Super BTN_RIGHT resize-view
for i in $(seq 1 9)
do
tags=$((1 << ($i - 1)))
# Super+[1-9] to focus tag [0-8]
riverctl map normal Super $i set-focused-tags $tags
# Super+Shift+[1-9] to tag focused view with tag [0-8]
riverctl map normal Super+Shift $i set-view-tags $tags
# Super+Ctrl+[1-9] to toggle focus of tag [0-8]
riverctl map normal Super+Control $i toggle-focused-tags $tags
# Super+Shift+Ctrl+[1-9] to toggle tag [0-8] of focused view
riverctl map normal Super+Shift+Control $i toggle-view-tags $tags
done
# Super+0 to focus all tags
# Super+Shift+0 to tag focused view with all tags
all_tags=$(((1 << 32) - 1))
riverctl map normal Super 0 set-focused-tags $all_tags
riverctl map normal Super+Shift 0 set-view-tags $all_tags
# Super+Space to toggle float
riverctl map normal Super Space toggle-float
# Super+F to toggle fullscreen
riverctl map normal Super F toggle-fullscreen
# Super+{Up,Right,Down,Left} to change layout orientation
riverctl map normal Super Up send-layout-cmd rivertile "main-location top"
riverctl map normal Super Right send-layout-cmd rivertile "main-location right"
riverctl map normal Super Down send-layout-cmd rivertile "main-location bottom"
riverctl map normal Super Left send-layout-cmd rivertile "main-location left"
# Declare a passthrough mode. This mode has only a single mapping to return to
# normal mode. This makes it useful for testing a nested wayland compositor
riverctl declare-mode passthrough
# Super+F11 to enter passthrough mode
riverctl map normal Super F11 enter-mode passthrough
# Super+F11 to return to normal mode
riverctl map passthrough Super F11 enter-mode normal
riverctl map normal Super R spawn 'bemenu-run -i -n'
# Various media key mapping examples for both normal and locked mode which do
# not have a modifier
for mode in normal locked
do
# Eject the optical drive (well if you still have one that is)
riverctl map $mode None XF86Eject spawn 'eject -T'
# Control pulse audio volume with pamixer (https://github.com/cdemoulins/pamixer)
riverctl map $mode None XF86AudioRaiseVolume spawn 'pamixer -i 5'
riverctl map $mode None XF86AudioLowerVolume spawn 'pamixer -d 5'
riverctl map $mode None XF86AudioMute spawn 'pamixer --toggle-mute'
# Control MPRIS aware media players with playerctl (https://github.com/altdesktop/playerctl)
riverctl map $mode None XF86AudioMedia spawn 'playerctl play-pause'
riverctl map $mode None XF86AudioPlay spawn 'playerctl play-pause'
riverctl map $mode None XF86AudioPrev spawn 'playerctl previous'
riverctl map $mode None XF86AudioNext spawn 'playerctl next'
# Control screen backlight brighness with light (https://github.com/haikarainen/light)
riverctl map $mode None XF86MonBrightnessUp spawn 'light -A 5'
riverctl map $mode None XF86MonBrightnessDown spawn 'light -U 5'
done
# Set background and border color
riverctl background-color 0x002b36
riverctl border-color-focused 0x93a1a1
riverctl border-color-unfocused 0x586e75
# Set keyboard repeat rate
riverctl set-repeat 50 300
# Make certain views start floating
riverctl float-filter-add app-id float
riverctl float-filter-add title "popup title with spaces"
# Set app-ids and titles of views which should use client side decorations
riverctl csd-filter-add app-id "gedit"
# startup
riverctl spawn "/usr/libexec/pipewire-launcher"
riverctl spawn "kanshi"
#riverctl spawn "kill -HUP $(pidof waybar) && waybar"
riverctl spawn "waybar"
# Set and exec into the default layout generator, rivertile.
# River will send the process group of the init executable SIGTERM on exit.
riverctl default-layout rivertile
exec rivertile -view-padding 6 -outer-padding 6

@ -1 +0,0 @@
riverctl float-filter-add title "Firefox — Sharing Indicator"

@ -1,9 +0,0 @@
#!/bin/sh
riverctl float-filter-add title "Firefox — Sharing Indicator"
#riverctl float-filter-add title Firefox — Sharing Indicator
riverctl float-filter-add title 'Firefox — Sharing Indicator'
riverctl float-filter-add title "Firefox — Sharing Indicator"
riverctl float-filter-add title "Firefox — Sharing Indicator"
riverctl float-filter-add title "Firefox — Sharing Indicator"
riverctl float-filter-add title "Firefox — Sharing Indicator"
riverctl float-filter-add title "Firefox — Sharing Indicator"
Loading…
Cancel
Save