My journey to get Alpine + Wayland + River to work on ThinkPad T14 G3 AMD
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 

4970 lines
88 KiB

###
### vlc 3.0.18
###
###
### lines beginning with a '#' character are comments
###
[lua] # Lua interpreter
# Lua interface (string)
#lua-intf=dummy
# Lua interface configuration (string)
#lua-config=
# Password (string)
#http-password=
# Source directory (string)
#http-src=
# Directory index (boolean)
#http-index=0
# TCP command input (string)
#rc-host=
# CLI input (string)
#cli-host=
# Host (string)
#telnet-host=localhost
# Port (integer)
#telnet-port=4212
# Password (string)
#telnet-password=
[dtv] # Digital Television and Radio
# DVB adapter (integer)
#dvb-adapter=0
# DVB device (integer)
#dvb-device=0
# Do not demultiplex (boolean)
#dvb-budget-mode=0
# Frequency (Hz) (integer)
#dvb-frequency=0
# Spectrum inversion (integer)
#dvb-inversion=-1
# Bandwidth (MHz) (integer)
#dvb-bandwidth=0
# Transmission mode (integer)
#dvb-transmission=0
# Guard interval (string)
#dvb-guard=
# High-priority code rate (string)
#dvb-code-rate-hp=
# Low-priority code rate (string)
#dvb-code-rate-lp=
# Hierarchy mode (integer)
#dvb-hierarchy=-1
# DVB-T2 Physical Layer Pipe (integer)
#dvb-plp-id=0
# Layer A modulation (string)
#dvb-a-modulation=
# Layer A code rate (string)
#dvb-a-fec=
# Layer A segments count (integer)
#dvb-a-count=0
# Layer A time interleaving (integer)
#dvb-a-interleaving=0
# Layer B modulation (string)
#dvb-b-modulation=
# Layer B code rate (string)
#dvb-b-fec=
# Layer B segments count (integer)
#dvb-b-count=0
# Layer B time interleaving (integer)
#dvb-b-interleaving=0
# Layer C modulation (string)
#dvb-c-modulation=
# Layer C code rate (string)
#dvb-c-fec=
# Layer C segments count (integer)
#dvb-c-count=0
# Layer C time interleaving (integer)
#dvb-c-interleaving=0
# Modulation / Constellation (string)
#dvb-modulation=
# Symbol rate (bauds) (integer)
#dvb-srate=0
# FEC code rate (string)
#dvb-fec=
# Stream identifier (integer)
#dvb-stream=0
# Pilot (integer)
#dvb-pilot=-1
# Roll-off factor (integer)
#dvb-rolloff=-1
# Transport stream ID (integer)
#dvb-ts-id=0
# Polarization (Voltage) (string)
#dvb-polarization=
# (integer)
#dvb-voltage=13
# High LNB voltage (boolean)
#dvb-high-voltage=0
# Local oscillator low frequency (kHz) (integer)
#dvb-lnb-low=0
# Local oscillator high frequency (kHz) (integer)
#dvb-lnb-high=0
# Universal LNB switch frequency (kHz) (integer)
#dvb-lnb-switch=11700000
# DiSEqC LNB number (integer)
#dvb-satno=0
# Uncommitted DiSEqC LNB number (integer)
#dvb-uncommitted=0
# Continuous 22kHz tone (integer)
#dvb-tone=-1
[xcb_screen] # Screen capture (with X11/XCB)
# Frame rate (float)
#screen-fps=2.000000
# Region left column (integer)
#screen-left=0
# Region top row (integer)
#screen-top=0
# Capture region width (integer)
#screen-width=0
# Capture region height (integer)
#screen-height=0
# Follow the mouse (boolean)
#screen-follow-mouse=0
[access_mms] # Microsoft Media Server (MMS) input
# TCP/UDP timeout (ms) (integer)
#mms-timeout=5000
# Force selection of all streams (boolean)
#mms-all=0
# Maximum bitrate (integer)
#mms-maxbitrate=0
[shm] # Shared memory framebuffer
# Frame rate (float)
#shm-fps=10.000000
# Frame buffer depth (integer)
#shm-depth=0
# Frame buffer width (integer)
#shm-width=800
# Frame buffer height (integer)
#shm-height=480
[rist] # RIST input
# RIST maximum packet size (bytes) (integer)
#packet-size=1472
# RIST demux/decode maximum jitter (default is 5ms) (integer)
#maximum-jitter=5
# RIST latency (ms) (integer)
#latency=1000
# RIST nack retry interval (ms) (integer)
#retry-interval=132
# RIST reorder buffer (ms) (integer)
#reorder-buffer=70
# RIST maximum retry count (integer)
#max-retries=10
# RIST nack type, 0 = range, 1 = bitmask. Default is range (integer)
#nack-type=0
# Disable NACK output packets (boolean)
#disable-nacks=0
# Do not check for a valid rtcp message from the encoder (boolean)
#mcast-blind-nacks=0
[cdda] # Audio CD input
# Audio CD device (string)
#cd-audio=/dev/sr0
# Musicbrainz Server (string)
#musicbrainz-server=musicbrainz.org
# CDDB Server (string)
#cddb-server=freedb.videolan.org
# CDDB port (integer)
#cddb-port=80
[dvdread] # DVDRead Input (no menu support)
# DVD angle (integer)
#dvdread-angle=1
[timecode] # Time code subpicture elementary stream generator
# Frame rate (string)
#timecode-fps=25/1
[rtp] # Real-Time Protocol (RTP) input
# RTCP (local) port (integer)
#rtcp-port=0
# SRTP key (hexadecimal) (string)
#srtp-key=
# SRTP salt (hexadecimal) (string)
#srtp-salt=
# Maximum RTP sources (integer)
#rtp-max-src=1
# RTP source timeout (sec) (integer)
#rtp-timeout=5
# Maximum RTP sequence number dropout (integer)
#rtp-max-dropout=3000
# Maximum RTP sequence number misordering (integer)
#rtp-max-misorder=100
# RTP payload format assumed for dynamic payloads (string)
#rtp-dynamic-pt=
[v4l2] # Video4Linux input
# Video capture device (string)
#v4l2-dev=/dev/video0
# Standard (string)
#v4l2-standard=
# Video input chroma format (string)
#v4l2-chroma=
# Input (integer)
#v4l2-input=0
# Audio input (integer)
#v4l2-audio-input=-1
# Width (integer)
#v4l2-width=0
# Height (integer)
#v4l2-height=0
# Picture aspect-ratio n:m (string)
#v4l2-aspect-ratio=4:3
# Frame rate (string)
#v4l2-fps=60
# Radio device (string)
#v4l2-radio-dev=/dev/radio0
# Frequency (integer)
#v4l2-tuner-frequency=-1
# Audio mode (integer)
#v4l2-tuner-audio-mode=3
# Reset controls (boolean)
#v4l2-controls-reset=0
# Brightness (integer)
#v4l2-brightness=-1
# Automatic brightness (integer)
#v4l2-brightness-auto=-1
# Contrast (integer)
#v4l2-contrast=-1
# Saturation (integer)
#v4l2-saturation=-1
# Hue (integer)
#v4l2-hue=-1
# Automatic hue (integer)
#v4l2-hue-auto=-1
# White balance temperature (K) (integer)
#v4l2-white-balance-temperature=-1
# Automatic white balance (integer)
#v4l2-auto-white-balance=-1
# Red balance (integer)
#v4l2-red-balance=-1
# Blue balance (integer)
#v4l2-blue-balance=-1
# Gamma (integer)
#v4l2-gamma=-1
# Automatic gain (integer)
#v4l2-autogain=-1
# Gain (integer)
#v4l2-gain=-1
# Sharpness (integer)
#v4l2-sharpness=-1
# Chroma gain (integer)
#v4l2-chroma-gain=-1
# Automatic chroma gain (integer)
#v4l2-chroma-gain-auto=-1
# Power line frequency (integer)
#v4l2-power-line-frequency=-1
# Backlight compensation (integer)
#v4l2-backlight-compensation=-1
# Band-stop filter (integer)
#v4l2-band-stop-filter=-1
# Horizontal flip (boolean)
#v4l2-hflip=0
# Vertical flip (boolean)
#v4l2-vflip=0
# Rotate (degrees) (integer)
#v4l2-rotate=-1
# Color killer (integer)
#v4l2-color-killer=-1
# Color effect (integer)
#v4l2-color-effect=-1
# Audio volume (integer)
#v4l2-audio-volume=-1
# Audio balance (integer)
#v4l2-audio-balance=-1
# Mute (boolean)
#v4l2-audio-mute=0
# Bass level (integer)
#v4l2-audio-bass=-1
# Treble level (integer)
#v4l2-audio-treble=-1
# Loudness mode (boolean)
#v4l2-audio-loudness=0
# v4l2 driver controls (string)
#v4l2-set-ctrls=
[linsys_hdsdi] # HD-SDI Input
# Link # (integer)
#linsys-hdsdi-link=0
# Video ID (integer)
#linsys-hdsdi-id-video=0
# Aspect ratio (string)
#linsys-hdsdi-aspect-ratio=
# Audio configuration (string)
#linsys-hdsdi-audio=0=1,1
[dvb] # DVB input with v4l2 support
# Probe DVB card for capabilities (boolean)
#dvb-probe=1
# Satellite scanning config (string)
#dvb-satellite=
# Scan tuning list (string)
#dvb-scanlist=
# Use NIT for scanning services (boolean)
#dvb-scan-nit=1
[smb] # SMB input
# Username (string)
#smb-user=
# Password (string)
#smb-pwd=
# SMB domain (string)
#smb-domain=
[live555] # RTP/RTSP/SDP demuxer (using Live555)
# Use RTP over RTSP (TCP) (boolean)
#rtsp-tcp=0
# Client port (integer)
#rtp-client-port=-1
# Force multicast RTP via RTSP (boolean)
#rtsp-mcast=0
# Tunnel RTSP and RTP over HTTP (boolean)
#rtsp-http=0
# HTTP tunnel port (integer)
#rtsp-http-port=80
# Kasenna RTSP dialect (boolean)
#rtsp-kasenna=0
# WMServer RTSP dialect (boolean)
#rtsp-wmserver=0
# Username (string)
#rtsp-user=
# Password (string)
#rtsp-pwd=
# RTSP frame buffer size (integer)
#rtsp-frame-buffer-size=250000
[filesystem] # File input
# List special files (boolean)
#list-special-files=0
[access_alsa] # ALSA audio capture
# Stereo (boolean)
#alsa-stereo=1
# Sample rate (integer)
#alsa-samplerate=48000
[imem] # Memory input
# ID (integer)
#imem-id=-1
# Group (integer)
#imem-group=0
# Category (integer)
#imem-cat=0
# Codec (string)
#imem-codec=
# Language (string)
#imem-language=
# Sample rate (integer)
#imem-samplerate=0
# Channels count (integer)
#imem-channels=0
# Width (integer)
#imem-width=0
# Height (integer)
#imem-height=0
# Display aspect ratio (string)
#imem-dar=
# Frame rate (string)
#imem-fps=
# Size (integer)
#imem-size=0
[satip] # SAT>IP Receiver Plugin
# Receive buffer (integer)
#satip-buffer=4194304
# Request multicast stream (boolean)
#satip-multicast=0
# Host (string)
#satip-host=
[vdr] # VDR recordings
# Chapter offset in ms (integer)
#vdr-chapter-offset=0
# Frame rate (float)
#vdr-fps=25.000000
[udp] # UDP input
# UDP Source timeout (sec) (integer)
#udp-timeout=-1
[http] # HTTP input
# Auto re-connect (boolean)
#http-reconnect=0
[libbluray] # Blu-ray Disc support (libbluray)
# Blu-ray menus (boolean)
#bluray-menu=1
# Region code (string)
#bluray-region=B
[access] # HTTPS input
# Cookies forwarding (boolean)
#http-forward-cookies=1
# User agent (string)
#http-user-agent=
[dvdnav] # DVDnav Input
# DVD angle (integer)
#dvdnav-angle=1
# Start directly in menu (boolean)
#dvdnav-menu=1
[ftp] # FTP input
# Username (string)
#ftp-user=
# Password (string)
#ftp-pwd=
# FTP account (string)
#ftp-account=anonymous
[access_srt] # SRT input
# Return poll wait after timeout milliseconds (-1 = infinite) (integer)
#poll-timeout=-1
# SRT latency (ms) (integer)
#latency=120
# Password for stream encryption (string)
#passphrase=
# Crypto key length in bytes (integer)
#key-length=16
# SRT Stream ID (string)
#streamid=
[concat] # Concatenated inputs
# Inputs list (string)
#concat-list=
[swscale] # Video scaling filter
# Scaling mode (integer)
#swscale-mode=2
[wall] # Wall video filter
# Number of columns (integer)
#wall-cols=3
# Number of rows (integer)
#wall-rows=3
# Active windows (string)
#wall-active=
# Element aspect ratio (string)
#wall-element-aspect=16:9
[clone] # Clone video filter
# Number of clones (integer)
#clone-count=2
# Video output modules (string)
#clone-vout-list=
[panoramix] # Panoramix: wall with overlap video filter
# Number of columns (integer)
#panoramix-cols=-1
# Number of rows (integer)
#panoramix-rows=-1
# length of the overlapping area (in %) (integer)
#panoramix-bz-length=100
# height of the overlapping area (in %) (integer)
#panoramix-bz-height=100
# Attenuation (boolean)
#panoramix-attenuate=1
# Attenuation, begin (in %) (integer)
#panoramix-bz-begin=0
# Attenuation, middle (in %) (integer)
#panoramix-bz-middle=50
# Attenuation, end (in %) (integer)
#panoramix-bz-end=100
# middle position (in %) (integer)
#panoramix-bz-middle-pos=50
# Gamma (Red) correction (float)
#panoramix-bz-gamma-red=1.000000
# Gamma (Green) correction (float)
#panoramix-bz-gamma-green=1.000000
# Gamma (Blue) correction (float)
#panoramix-bz-gamma-blue=1.000000
# Black Crush for Red (integer)
#panoramix-bz-blackcrush-red=140
# Black Crush for Green (integer)
#panoramix-bz-blackcrush-green=140
# Black Crush for Blue (integer)
#panoramix-bz-blackcrush-blue=140
# White Crush for Red (integer)
#panoramix-bz-whitecrush-red=200
# White Crush for Green (integer)
#panoramix-bz-whitecrush-green=200
# White Crush for Blue (integer)
#panoramix-bz-whitecrush-blue=200
# Black Level for Red (integer)
#panoramix-bz-blacklevel-red=150
# Black Level for Green (integer)
#panoramix-bz-blacklevel-green=150
# Black Level for Blue (integer)
#panoramix-bz-blacklevel-blue=150
# White Level for Red (integer)
#panoramix-bz-whitelevel-red=0
# White Level for Green (integer)
#panoramix-bz-whitelevel-green=0
# White Level for Blue (integer)
#panoramix-bz-whitelevel-blue=0
# Active windows (string)
#panoramix-active=
[ps] # PS muxer
# DTS delay (ms) (integer)
#sout-ps-dts-delay=200
# PES maximum size (integer)
#sout-ps-pes-max-size=65500
[asf] # ASF muxer
# Title (string)
#sout-asf-title=
# Author (string)
#sout-asf-author=
# Copyright (string)
#sout-asf-copyright=
# Comment (string)
#sout-asf-comment=
# Rating (string)
#sout-asf-rating=
# Packet Size (integer)
#sout-asf-packet-size=4096
# Bitrate override (integer)
#sout-asf-bitrate-override=0
[mux_ts] # TS muxer (libdvbpsi)
# Digital TV Standard (string)
#sout-ts-standard=dvb
# Video PID (integer)
#sout-ts-pid-video=100
# Audio PID (integer)
#sout-ts-pid-audio=200
# SPU PID (integer)
#sout-ts-pid-spu=300
# PMT PID (integer)
#sout-ts-pid-pmt=32
# TS ID (integer)
#sout-ts-tsid=0
# NET ID (integer)
#sout-ts-netid=0
# PMT Program numbers (string)
#sout-ts-program-pmt=
# Set PID to ID of ES (boolean)
#sout-ts-es-id-pid=0
# Mux PMT (requires --sout-ts-es-id-pid) (string)
#sout-ts-muxpmt=
# SDT Descriptors (requires --sout-ts-es-id-pid) (string)
#sout-ts-sdtdesc=
# Data alignment (boolean)
#sout-ts-alignment=1
# Shaping delay (ms) (integer)
#sout-ts-shaping=200
# Use keyframes (boolean)
#sout-ts-use-key-frames=0
# PCR interval (ms) (integer)
#sout-ts-pcr=70
# Minimum B (deprecated) (integer)
#sout-ts-bmin=0
# Maximum B (deprecated) (integer)
#sout-ts-bmax=0
# DTS delay (ms) (integer)
#sout-ts-dts-delay=400
# Crypt audio (boolean)
#sout-ts-crypt-audio=1
# Crypt video (boolean)
#sout-ts-crypt-video=1
# CSA Key (string)
#sout-ts-csa-ck=
# Second CSA Key (string)
#sout-ts-csa2-ck=
# CSA Key in use (string)
#sout-ts-csa-use=1
# Packet size in bytes to encrypt (integer)
#sout-ts-csa-pkt=188
[avi] # AVI muxer
# Artist (string)
#sout-avi-artist=
# Date (string)
#sout-avi-date=
# Genre (string)
#sout-avi-genre=
# Copyright (string)
#sout-avi-copyright=
# Comment (string)
#sout-avi-comment=
# Name (string)
#sout-avi-name=
# Subject (string)
#sout-avi-subject=
# Encoder (string)
#sout-avi-encoder=VLC Media Player - 3.0.18 Vetinari
# Keywords (string)
#sout-avi-keywords=
[mux_ogg] # Ogg/OGM muxer
# Index interval (integer)
#sout-ogg-indexintvl=1000
# Index size ratio (float)
#sout-ogg-indexratio=1.000000
[mp4] # MP4/MOV muxer
# Create "Fast Start" files (boolean)
#sout-mp4-faststart=1
[oldrc] # Remote control interface
# Show stream position (boolean)
#rc-show-pos=0
# Fake TTY (boolean)
#rc-fake-tty=0
# UNIX socket command input (string)
#rc-unix=
# TCP command input (string)
#rc-host=
[gestures] # Mouse gestures control interface
# Motion threshold (10-100) (integer)
#gestures-threshold=30
# Trigger button (string)
#gestures-button=left
[motion] # motion control interface
[netsync] # Network synchronization
# Network master clock (boolean)
#netsync-master=0
# Master server IP address (string)
#netsync-master-ip=
# UDP timeout (in ms) (integer)
#netsync-timeout=500
[transform] # Video transformation filter
# Transform type (string)
#transform-type=90
[alphamask] # Alpha mask video filter
# Transparency mask (string)
#alphamask-mask=
[posterize] # Posterize video filter
# Posterize level (integer)
#posterize-level=6
[colorthres] # Color threshold filter
# Color (integer)
#colorthres-color=16711680
# Saturation threshold (integer)
#colorthres-saturationthres=20
# Similarity threshold (integer)
#colorthres-similaritythres=15
[deinterlace] # Deinterlacing video filter
# Streaming deinterlace mode (string)
#sout-deinterlace-mode=blend
# Phosphor chroma mode for 4:2:0 input (integer)
#sout-deinterlace-phosphor-chroma=2
# Phosphor old field dimmer strength (integer)
#sout-deinterlace-phosphor-dimmer=2
[motionblur] # Motion blur filter
# Blur factor (1-127) (integer)
#blur-factor=80
[rotate] # Rotate video filter
# Angle in degrees (float)
#rotate-angle=30.000000
# Use motion sensors (boolean)
#rotate-use-motion=0
[bluescreen] # Bluescreen video filter
# Bluescreen U value (integer)
#bluescreen-u=120
# Bluescreen V value (integer)
#bluescreen-v=90
# Bluescreen U tolerance (integer)
#bluescreen-ut=17
# Bluescreen V tolerance (integer)
#bluescreen-vt=17
[gaussianblur] # Gaussian blur video filter
# Gaussian's std deviation (float)
#gaussianblur-sigma=2.000000
[postproc] # Video post processing filter
# Post processing quality (integer)
#postproc-q=6
# FFmpeg post processing filter chains (string)
#postproc-name=default
[antiflicker] # antiflicker video filter
# Window size (integer)
#antiflicker-window-size=10
# Softening value (integer)
#antiflicker-softening-size=10
[blendbench] # Blending benchmark filter
# Number of time to blend (integer)
#blendbench-loops=1000
# Alpha of the blended image (integer)
#blendbench-alpha=128
# Image to be blended onto (string)
#blendbench-base-image=
# Chroma for the base image (string)
#blendbench-base-chroma=I420
# Image which will be blended (string)
#blendbench-blend-image=
# Chroma for the blend image (string)
#blendbench-blend-chroma=YUVA
[gradient] # Gradient video filter
# Distort mode (string)
#gradient-mode=gradient
# Gradient image type (integer)
#gradient-type=0
# Apply cartoon effect (boolean)
#gradient-cartoon=1
[croppadd] # Video cropping filter
# Pixels to crop from top (integer)
#croppadd-croptop=0
# Pixels to crop from bottom (integer)
#croppadd-cropbottom=0
# Pixels to crop from left (integer)
#croppadd-cropleft=0
# Pixels to crop from right (integer)
#croppadd-cropright=0
# Pixels to padd to top (integer)
#croppadd-paddtop=0
# Pixels to padd to bottom (integer)
#croppadd-paddbottom=0
# Pixels to padd to left (integer)
#croppadd-paddleft=0
# Pixels to padd to right (integer)
#croppadd-paddright=0
[extract] # Extract RGB component video filter
# RGB component to extract (integer)
#extract-component=16711680
[ball] # Ball video filter
# Ball color (string)
#ball-color=red
# Ball speed (integer)
#ball-speed=4
# Ball size (integer)
#ball-size=10
# Gradient threshold (integer)
#ball-gradient-threshold=40
# Edge visible (boolean)
#ball-edge-visible=1
[gradfun] # Gradfun video filter
# Radius (integer)
#gradfun-radius=16
# Strength (float)
#gradfun-strength=1.200000
[fps] # FPS conversion video filter
# Frame rate (string)
#fps-fps=
[erase] # Erase video filter
# Image mask (string)
#erase-mask=
# X coordinate (integer)
#erase-x=0
# Y coordinate (integer)
#erase-y=0
[hqdn3d] # High Quality 3D Denoiser filter
# Spatial luma strength (0-254) (float)
#hqdn3d-luma-spat=4.000000
# Spatial chroma strength (0-254) (float)
#hqdn3d-chroma-spat=3.000000
# Temporal luma strength (0-254) (float)
#hqdn3d-luma-temp=6.000000
# Temporal chroma strength (0-254) (float)
#hqdn3d-chroma-temp=4.500000
[canvas] # Canvas video filter
# Output width (integer)
#canvas-width=0
# Output height (integer)
#canvas-height=0
# Output picture aspect ratio (string)
#canvas-aspect=
# Pad video (boolean)
#canvas-padd=1
[anaglyph] # Convert 3D picture to anaglyph image video filter
# Color scheme (string)
#anaglyph-scheme=red-cyan
[sepia] # Sepia video filter
# Sepia intensity (integer)
#sepia-intensity=120
[adjust] # Image properties filter
# Image contrast (0-2) (float)
#contrast=1.000000
# Image brightness (0-2) (float)
#brightness=1.000000
# Image hue (-180..180) (float)
#hue=0.000000
# Image saturation (0-3) (float)
#saturation=1.000000
# Image gamma (0-10) (float)
#gamma=1.000000
# Brightness threshold (boolean)
#brightness-threshold=0
[puzzle] # Puzzle interactive game video filter
# Number of puzzle rows (integer)
#puzzle-rows=4
# Number of puzzle columns (integer)
#puzzle-cols=4
# Border (integer)
#puzzle-border=3
# Small preview (boolean)
#puzzle-preview=0
# Small preview size (integer)
#puzzle-preview-size=15
# Piece edge shape size (integer)
#puzzle-shape-size=90
# Auto shuffle (integer)
#puzzle-auto-shuffle=0
# Auto solve (integer)
#puzzle-auto-solve=0
# Rotation (integer)
#puzzle-rotation=0
# Game mode (integer)
#puzzle-mode=0
[mirror] # Mirror video filter
# Mirror orientation (integer)
#mirror-split=0
# Direction (integer)
#mirror-direction=0
[scene] # Scene video filter
# Image format (string)
#scene-format=png
# Image width (integer)
#scene-width=-1
# Image height (integer)
#scene-height=-1
# Filename prefix (string)
#scene-prefix=scene
# Directory path prefix (string)
#scene-path=
# Always write to the same file (boolean)
#scene-replace=0
# Recording ratio (integer)
#scene-ratio=50
[sharpen] # Sharpen video filter
# Sharpen strength (0-2) (float)
#sharpen-sigma=0.050000
[grain] # Grain video filter
# Variance (float)
#grain-variance=2.000000
# Minimal period (integer)
#grain-period-min=1
# Maximal period (integer)
#grain-period-max=48
[mono] # Stereo to mono downmixer
# Use downmix algorithm (boolean)
#sout-mono-downmix=1
# Select channel to keep (integer)
#sout-mono-channel=-1
[normvol] # Volume normalizer
# Number of audio buffers (integer)
#norm-buff-size=20
# Maximal volume level (float)
#norm-max-level=2.000000
[equalizer] # Equalizer with 10 bands
# Equalizer preset (string)
#equalizer-preset=flat
# Bands gain (string)
#equalizer-bands=
# Two pass (boolean)
#equalizer-2pass=0
# Use VLC frequency bands (boolean)
#equalizer-vlcfreqs=1
# Global gain (float)
#equalizer-preamp=12.000000
[audiobargraph_a] # Audio part of the BarGraph function
# Defines if BarGraph information should be sent (integer)
#audiobargraph_a-bargraph=1
# Sends the barGraph information every n audio packets (integer)
#audiobargraph_a-bargraph_repetition=4
# Defines if silence alarm information should be sent (integer)
#audiobargraph_a-silence=1
# Time window to use in ms (integer)
#audiobargraph_a-time_window=5000
# Minimum Audio level to raise the alarm (float)
#audiobargraph_a-alarm_threshold=0.020000
# Time between two alarm messages in ms (integer)
#audiobargraph_a-repetition_time=2000
[speex_resampler] # Speex resampler
# Resampling quality (integer)
#speex-resampler-quality=4
[stereo_widen] # Simple stereo widening effect
# Delay time (float)
#stereowiden-delay=20.000000
# Feedback gain (float)
#stereowiden-feedback=0.300000
# Crossfeed (float)
#stereowiden-crossfeed=0.300000
# Dry mix (float)
#stereowiden-dry-mix=0.800000
[compressor] # Dynamic range compressor
# RMS/peak (float)
#compressor-rms-peak=0.200000
# Attack time (float)
#compressor-attack=25.000000
# Release time (float)
#compressor-release=100.000000
# Threshold level (float)
#compressor-threshold=-11.000000
# Ratio (float)
#compressor-ratio=4.000000
# Knee radius (float)
#compressor-knee=5.000000
# Makeup gain (float)
#compressor-makeup-gain=7.000000
[scaletempo] # Audio tempo scaler synched with rate
# Stride Length (integer)
#scaletempo-stride=30
# Overlap Length (float)
#scaletempo-overlap=0.200000
# Search Length (integer)
#scaletempo-search=14
[spatializer] # Audio Spatializer
# Room size (float)
#spatializer-roomsize=0.850000
# Room width (float)
#spatializer-width=1.000000
# Wet (float)
#spatializer-wet=0.400000
# Dry (float)
#spatializer-dry=0.500000
# Damp (float)
#spatializer-damp=0.500000
[headphone] # Headphone virtual spatialization effect
# Characteristic dimension (integer)
#headphone-dim=10
# Compensate delay (boolean)
#headphone-compensate=0
# No decoding of Dolby Surround (boolean)
#headphone-dolby=0
[gain] # Gain control filter
# Gain multiplier (float)
#gain-value=1.000000
[chorus_flanger] # Sound Delay
# Delay time (float)
#delay-time=20.000000
# Sweep Depth (float)
#sweep-depth=6.000000
# Sweep Rate (float)
#sweep-rate=6.000000
# Feedback gain (float)
#feedback-gain=0.500000
# Wet mix (float)
#wet-mix=0.400000
# Dry Mix (float)
#dry-mix=0.400000
[remap] # Audio channel remapper
# Left (integer)
#aout-remap-channel-left=0
# Center (integer)
#aout-remap-channel-center=1
# Right (integer)
#aout-remap-channel-right=2
# Rear left (integer)
#aout-remap-channel-rearleft=3
# Rear center (integer)
#aout-remap-channel-rearcenter=4
# Rear right (integer)
#aout-remap-channel-rearright=5
# Side left (integer)
#aout-remap-channel-middleleft=6
# Side right (integer)
#aout-remap-channel-middleright=7
# Low-frequency effects (integer)
#aout-remap-channel-lfe=8
# Normalize channels (boolean)
#aout-remap-normalize=1
[scaletempo_pitch] # Pitch Shifter
# Stride Length (integer)
#scaletempo-stride=30
# Overlap Length (float)
#scaletempo-overlap=0.200000
# Search Length (integer)
#scaletempo-search=14
# Pitch Shift (float)
#pitch-shift=0.000000
[param_eq] # Parametric Equalizer
# Low freq (Hz) (float)
#param-eq-lowf=100.000000
# Low freq gain (dB) (float)
#param-eq-lowgain=0.000000
# High freq (Hz) (float)
#param-eq-highf=10000.000000
# High freq gain (dB) (float)
#param-eq-highgain=0.000000
# Freq 1 (Hz) (float)
#param-eq-f1=300.000000
# Freq 1 gain (dB) (float)
#param-eq-gain1=0.000000
# Freq 1 Q (float)
#param-eq-q1=3.000000
# Freq 2 (Hz) (float)
#param-eq-f2=1000.000000
# Freq 2 gain (dB) (float)
#param-eq-gain2=0.000000
# Freq 2 Q (float)
#param-eq-q2=3.000000
# Freq 3 (Hz) (float)
#param-eq-f3=3000.000000
# Freq 3 gain (dB) (float)
#param-eq-gain3=0.000000
# Freq 3 Q (float)
#param-eq-q3=3.000000
[file] # File stream output
# Overwrite existing file (boolean)
#sout-file-overwrite=1
# Append to file (boolean)
#sout-file-append=0
# Format time and date (boolean)
#sout-file-format=0
# Synchronous writing (boolean)
#sout-file-sync=0
[udp] # UDP stream output
# Caching value (ms) (integer)
#sout-udp-caching=300
# Group packets (integer)
#sout-udp-group=1
[access_output_rist] # RIST stream output
# RIST target packet size (bytes) (integer)
#sout-rist-packet-size=1328
# RIST data output caching size (ms) (integer)
#sout-rist-caching=50
# RIST retry-buffer queue size (ms) (integer)
#sout-rist-buffer-size=0
# SSRC used in RTP output (default is random, i.e. 0) (integer)
#sout-rist-ssrc=0
# Stream name (string)
#sout-rist-stream-name=
[http] # HTTP stream output
# Username (string)
#sout-http-user=
# Password (string)
#sout-http-pwd=
# Mime (string)
#sout-http-mime=
# Metacube (boolean)
#sout-http-metacube=0
[access_output_srt] # SRT stream output
# Return poll wait after timeout milliseconds (-1 = infinite) (integer)
#poll-timeout=-1
# SRT latency (ms) (integer)
#latency=120
# Password for stream encryption (string)
#passphrase=
# SRT maximum payload size (bytes) (integer)
#payload-size=1316
# SRT maximum bandwidth ceiling (bytes) (integer)
#bandwidth-overhead-limit=25
# Crypto key length in bytes (integer)
#key-length=16
# SRT Stream ID (string)
#streamid=
[access_output_livehttp] # HTTP Live streaming output
# Segment length (integer)
#sout-livehttp-seglen=10
# Number of segments (integer)
#sout-livehttp-numsegs=0
# Number of first segment (integer)
#sout-livehttp-initial-segment-number=1
# Split segments anywhere (boolean)
#sout-livehttp-splitanywhere=0
# Delete segments (boolean)
#sout-livehttp-delsegs=1
# Use muxers rate control mechanism (boolean)
#sout-livehttp-ratecontrol=0
# Allow cache (boolean)
#sout-livehttp-caching=0
# Use randomized IV for encryption (boolean)
#sout-livehttp-generate-iv=0
# Index file (string)
#sout-livehttp-index=
# Full URL to put in index file (string)
#sout-livehttp-index-url=
# AES key URI to place in playlist (string)
#sout-livehttp-key-uri=
# AES key file (string)
#sout-livehttp-key-file=
# File where vlc reads key-uri and keyfile-location (string)
#sout-livehttp-key-loadfile=
[access_output_shout] # IceCAST output
# Stream name (string)
#sout-shout-name=VLC media player - Live stream
# Stream description (string)
#sout-shout-description=Live stream from VLC media player
# Stream MP3 (boolean)
#sout-shout-mp3=0
# Genre description (string)
#sout-shout-genre=Alternative
# URL description (string)
#sout-shout-url=http://www.videolan.org/vlc
# Bitrate (string)
#sout-shout-bitrate=
# Samplerate (string)
#sout-shout-samplerate=
# Number of channels (string)
#sout-shout-channels=
# Ogg Vorbis Quality (string)
#sout-shout-quality=
# Stream public (boolean)
#sout-shout-public=0
[notify] # LibNotify Notification Plugin
# Timeout (ms) (integer)
#notify-timeout=4000
[folder] # Folder meta data
# Album art filename (string)
#album-art-filename=
[adaptive] # Unified adaptive streaming for DASH/HLS
# Adaptive Logic (string)
#adaptive-logic=
# Maximum device width (integer)
#adaptive-maxwidth=0
# Maximum device height (integer)
#adaptive-maxheight=0
# Fixed Bandwidth in KiB/s (integer)
#adaptive-bw=250
# Use regular HTTP modules (boolean)
#adaptive-use-access=0
# Live Playback delay (ms) (integer)
#adaptive-livedelay=15000
# Max buffering (ms) (integer)
#adaptive-maxbuffer=30000
# Low latency (integer)
#adaptive-lowlatency=-1
[mjpeg] # M-JPEG camera demuxer
# Frames per Second (float)
#mjpeg-fps=0.000000
[mkv] # Matroska stream demuxer
# Respect ordered chapters (boolean)
#mkv-use-ordered-chapters=1
# Chapter codecs (boolean)
#mkv-use-chapter-codec=1
# Preload MKV files in the same directory (boolean)
#mkv-preload-local-dir=1
# Seek based on percent not time (boolean)
#mkv-seek-percent=0
# Dummy Elements (boolean)
#mkv-use-dummy=0
# Preload clusters (boolean)
#mkv-preload-clusters=0
[image] # Image demuxer
# ES ID (integer)
#image-id=-1
# Group (integer)
#image-group=0
# Decode (boolean)
#image-decode=1
# Forced chroma (string)
#image-chroma=
# Duration in seconds (float)
#image-duration=10.000000
# Frame rate (string)
#image-fps=10/1
# Real-time (boolean)
#image-realtime=0
[rawdv] # DV (Digital Video) demuxer
# Hurry up (boolean)
#rawdv-hurry-up=0
[playlist] # Playlist
# Skip ads (boolean)
#playlist-skip-ads=1
# Show shoutcast adult content (boolean)
#shoutcast-show-adult=0
[vc1] # VC1 video demuxer
# Frames per Second (float)
#vc1-fps=25.000000
[ts] # MPEG Transport Stream demuxer
# Digital TV Standard (string)
#ts-standard=auto
# Extra PMT (string)
#ts-extra-pmt=
# Trust in-stream PCR (boolean)
#ts-trust-pcr=1
# Set id of ES to PID (boolean)
#ts-es-id-pid=1
# CSA Key (string)
#ts-csa-ck=
# Second CSA Key (string)
#ts-csa2-ck=
# Packet size in bytes to decrypt (integer)
#ts-csa-pkt=188
# Separate sub-streams (boolean)
#ts-split-es=1
# Seek based on percent not time (boolean)
#ts-seek-percent=0
# Check packets continuity counter (boolean)
#ts-cc-check=1
# Only create ES on program sending data (boolean)
#ts-pmtfix-waitdata=1
# Try to generate PAT/PMT if missing (boolean)
#ts-patfix=1
# Try to fix too early PCR (or late DTS) (boolean)
#ts-pcr-offsetfix=1
[demuxdump] # File dumper
# Dump module (string)
#demuxdump-access=file
# Dump filename (string)
#demuxdump-file=stream-demux.dump
# Append to existing file (boolean)
#demuxdump-append=0
[mp4] # MP4 stream demuxer
# M4A audio only (boolean)
#mp4-m4a-audioonly=0
[diracsys] # Dirac video demuxer
# Value to adjust dts by (integer)
#dirac-dts-offset=0
[subtitle] # Text subtitle parser
# Frames per Second (float)
#sub-fps=0.000000
# Subtitle delay (integer)
#sub-delay=0
# Subtitle format (string)
#sub-type=auto
# Subtitle description (string)
#sub-description=
[es] # MPEG-I/II/4 / A52 / DTS / MLP audio
# Frames per Second (float)
#es-fps=25.000000
[ps] # MPEG-PS demuxer
# Trust MPEG timestamps (boolean)
#ps-trust-timestamps=1
[h26x] # H264 video demuxer
# Frames per Second (float)
#h264-fps=0.000000
# Frames per Second (float)
#hevc-fps=0.000000
[rawaud] # Raw audio demuxer
# Audio channels (integer)
#rawaud-channels=2
# Audio samplerate (Hz) (integer)
#rawaud-samplerate=48000
# FOURCC code of raw input format (string)
#rawaud-fourcc=s16l
# Forces the audio language (string)
#rawaud-lang=eng
[avi] # AVI demuxer
# Force interleaved method (boolean)
#avi-interleaved=0
# Force index creation (integer)
#avi-index=0
[rawvid] # Raw video demuxer
# Frames per Second (string)
#rawvid-fps=
# Width (integer)
#rawvid-width=0
# Height (integer)
#rawvid-height=0
# Force chroma (Use carefully) (string)
#rawvid-chroma=
# Aspect ratio (string)
#rawvid-aspect-ratio=
[vdpau_chroma] # VDPAU surface conversions
# Deinterlace (integer)
#vdpau-deinterlace=1
# Inverse telecine (boolean)
#vdpau-ivtc=0
# Deinterlace chroma skip (boolean)
#vdpau-chroma-skip=0
# Noise reduction level (float)
#vdpau-noise-reduction=0.000000
# Scaling quality (integer)
#vdpau-scaling=0
[console] # Console logger
[syslog] # System logger (syslog)
# System log (syslog) (boolean)
#syslog=0
# Debug messages (boolean)
#syslog-debug=0
# Identity (string)
#syslog-ident=vlc
# Facility (string)
#syslog-facility=user
[file] # File logger
# Log to file (boolean)
#file-logging=0
# Log filename (string)
#logfile=
# Log format (string)
#logmode=text
# Verbosity (integer)
#log-verbose=-1
[mpegvideo] # MPEG-I/II video packetizer
# Sync on Intra Frame (boolean)
#packetizer-mpegvideo-sync-iframe=0
[qt] # Qt interface
# Start in minimal view (without menus) (boolean)
#qt-minimal-view=0
# Systray icon (boolean)
#qt-system-tray=1
# Show notification popup on track change (integer)
#qt-notification=1
# Start VLC with only a systray icon (boolean)
#qt-start-minimized=0
# Pause the video playback when minimized (boolean)
#qt-pause-minimized=0
# Windows opacity between 0.1 and 1 (float)
#qt-opacity=1.000000
# Fullscreen controller opacity between 0.1 and 1 (float)
#qt-fs-opacity=0.800000
# Resize interface to the native video size (boolean)
#qt-video-autoresize=1
# Show playing item name in window title (boolean)
#qt-name-in-title=1
# Show a controller in fullscreen mode (boolean)
#qt-fs-controller=1
# Save the recently played items in the menu (boolean)
#qt-recentplay=1
# List of words separated by | to filter (string)
#qt-recentplay-filter=
# Continue playback? (integer)
#qt-continue=1
# Embed the file browser in open dialog (boolean)
#qt-embedded-open=0
# Show advanced preferences over simple ones (boolean)
#qt-advanced-pref=0
# Show unimportant error and warnings dialogs (boolean)
#qt-error-dialogs=1
# Define the colors of the volume slider (string)
#qt-slider-colours=153;210;153;20;210;20;255;199;15;245;39;29
# Ask for network policy at start (boolean)
qt-privacy-ask=0
# Define which screen fullscreen goes (integer)
#qt-fullscreen-screennumber=-1
# Load extensions on startup (boolean)
#qt-autoload-extensions=1
# Display background cone or art (boolean)
#qt-bgcone=1
# Expanding background cone or art (boolean)
#qt-bgcone-expands=0
# Allow automatic icon changes (boolean)
#qt-icon-change=1
# Maximum Volume displayed (integer)
#qt-max-volume=125
# Fullscreen controller mouse sensitivity (integer)
#qt-fs-sensitivity=3
# When to raise the interface (integer)
#qt-auto-raise=1
[skins2] # Skinnable Interface
# Skin to use (string)
#skins2-last=
# Config of last used skin (string)
#skins2-config=
# Enable transparency effects (boolean)
#skins2-transparency=0
# Use a skinned playlist (boolean)
#skinned-playlist=1
# Display video in a skinned window if any (boolean)
#skinned-video=1
[ncurses] # Ncurses interface
# Filebrowser starting point (string)
#browse-dir=
[glspectrum] # 3D OpenGL spectrum visualization
# Video width (integer)
#glspectrum-width=400
# Video height (integer)
#glspectrum-height=300
[visual] # Visualizer filter
# Effects list (string)
#effect-list=spectrum
# Video width (integer)
#effect-width=800
# Video height (integer)
#effect-height=500
# FFT window (string)
#effect-fft-window=flat
# Kaiser window parameter (float)
#effect-kaiser-param=3.000000
# Show 80 bands instead of 20 (boolean)
#visual-80-bands=1
# Draw peaks in the analyzer (boolean)
#visual-peaks=1
# Enable original graphic spectrum (boolean)
#spect-show-original=0
# Draw the base of the bands (boolean)
#spect-show-base=1
# Base pixel radius (integer)
#spect-radius=42
# Spectral sections (integer)
#spect-sections=3
# V-plane color (integer)
#spect-color=80
# Draw bands in the spectrometer (boolean)
#spect-show-bands=1
# Show 80 bands instead of 20 (boolean)
#spect-80-bands=1
# Number of blank pixels between bands. (integer)
#spect-separ=1
# Amplification (integer)
#spect-amp=8
# Draw peaks in the analyzer (boolean)
#spect-show-peaks=1
# Peak extra width (integer)
#spect-peak-width=61
# Peak height (integer)
#spect-peak-height=1
[dav1d] # Dav1d video decoder
# Frames Threads (integer)
#dav1d-thread-frames=0
[ddummy] # Dummy decoder
# Save raw codec data (boolean)
#dummy-save-es=0
[telx] # Teletext subtitles decoder
# Override page (integer)
#telx-override-page=-1
# Ignore subtitle flag (boolean)
#telx-ignore-subtitle-flag=0
# Workaround for France (boolean)
#telx-french-workaround=0
[theora] # Theora video decoder
# Post processing quality (integer)
#theora-postproc=-1
# Encoding quality (integer)
#sout-theora-quality=2
[jpeg] # JPEG image decoder
# Quality level (integer)
#sout-jpeg-quality=95
[avcodec] # FFmpeg audio/video decoder
# Direct rendering (boolean)
#avcodec-dr=1
# Show corrupted frames (boolean)
#avcodec-corrupted=1
# Error resilience (integer)
#avcodec-error-resilience=1
# Workaround bugs (integer)
#avcodec-workaround-bugs=1
# Hurry up (boolean)
#avcodec-hurry-up=1
# Skip frame (default=0) (integer)
#avcodec-skip-frame=0
# Skip idct (default=0) (integer)
#avcodec-skip-idct=0
# Allow speed tricks (boolean)
#avcodec-fast=0
# Skip the loop filter for H.264 decoding (integer)
#avcodec-skiploopfilter=0
# Debug mask (integer)
#avcodec-debug=0
# Codec name (string)
#avcodec-codec=
# Hardware decoding (string)
#avcodec-hw=any
# Threads (integer)
#avcodec-threads=0
# Advanced options (string)
#avcodec-options=
# Codec name (string)
#sout-avcodec-codec=
# Quality level (string)
#sout-avcodec-hq=rd
# Ratio of key frames (integer)
#sout-avcodec-keyint=0
# Ratio of B frames (integer)
#sout-avcodec-bframes=0
# Hurry up (boolean)
#sout-avcodec-hurry-up=0
# Interlaced encoding (boolean)
#sout-avcodec-interlace=0
# Interlaced motion estimation (boolean)
#sout-avcodec-interlace-me=1
# Video bitrate tolerance (integer)
#sout-avcodec-vt=0
# Pre-motion estimation (boolean)
#sout-avcodec-pre-me=0
# Rate control buffer size (integer)
#sout-avcodec-rc-buffer-size=0
# Rate control buffer aggressiveness (float)
#sout-avcodec-rc-buffer-aggressivity=1.000000
# I quantization factor (float)
#sout-avcodec-i-quant-factor=0.000000
# Noise reduction (integer)
#sout-avcodec-noise-reduction=0
# MPEG4 quantization matrix (boolean)
#sout-avcodec-mpeg4-matrix=0
# Minimum video quantizer scale (integer)
#sout-avcodec-qmin=0
# Maximum video quantizer scale (integer)
#sout-avcodec-qmax=0
# Trellis quantization (boolean)
#sout-avcodec-trellis=0
# Fixed quantizer scale (float)
#sout-avcodec-qscale=3.000000
# Strict standard compliance (integer)
#sout-avcodec-strict=0
# Luminance masking (float)
#sout-avcodec-lumi-masking=0.000000
# Darkness masking (float)
#sout-avcodec-dark-masking=0.000000
# Motion masking (float)
#sout-avcodec-p-masking=0.000000
# Border masking (float)
#sout-avcodec-border-masking=0.000000
# Luminance elimination (integer)
#sout-avcodec-luma-elim-threshold=0
# Chrominance elimination (integer)
#sout-avcodec-chroma-elim-threshold=0
# Specify AAC audio profile to use (string)
#sout-avcodec-aac-profile=low
# Advanced options (string)
#sout-avcodec-options=
# Format name (string)
#avformat-format=
# Advanced options (string)
#avformat-options=
# Avformat mux (string)
#sout-avformat-mux=
# Advanced options (string)
#sout-avformat-options=
# Reset timestamps (boolean)
#sout-avformat-reset-ts=0
# Advanced options (string)
#avio-options=
# Advanced options (string)
#sout-avio-options=
[subsdec] # Text subtitle decoder
# Subtitle justification (integer)
#subsdec-align=-1
# Subtitle text encoding (string)
subsdec-encoding=Windows-1251
# UTF-8 subtitle autodetection (boolean)
#subsdec-autodetect-utf8=1
[spudec] # DVD subtitles decoder
# Disable DVD subtitle transparency (boolean)
#dvdsub-transparency=0
[ttml] # TTML subtitles decoder
# Subtitle justification (integer)
#ttml-align=0
[vpx] # WebM video decoder
# Quality mode (integer)
#sout-vpx-quality-mode=1000000
[x26410b] # H.264/MPEG-4 Part 10/AVC encoder (x264 10-bit)
# Maximum GOP size (integer)
#sout-x26410b-keyint=250
# Minimum GOP size (integer)
#sout-x26410b-min-keyint=25
# Use recovery points to close GOPs (boolean)
#sout-x26410b-opengop=0
# Enable compatibility hacks for Blu-ray support (boolean)
#sout-x26410b-bluray-compat=0
# Extra I-frames aggressivity (integer)
#sout-x26410b-scenecut=40
# B-frames between I and P (integer)
#sout-x26410b-bframes=3
# Adaptive B-frame decision (integer)
#sout-x26410b-b-adapt=1
# Influence (bias) B-frames usage (integer)
#sout-x26410b-b-bias=0
# Keep some B-frames as references (string)
#sout-x26410b-bpyramid=normal
# CABAC (boolean)
#sout-x26410b-cabac=1
# Use fullrange instead of TV colorrange (boolean)
#sout-x26410b-fullrange=0
# Number of reference frames (integer)
#sout-x26410b-ref=3
# Skip loop filter (boolean)
#sout-x26410b-nf=0
# Loop filter AlphaC0 and Beta parameters alpha:beta (string)
#sout-x26410b-deblock=0:0
# Strength of psychovisual optimization, default is "1.0:0.0" (string)
#sout-x26410b-psy-rd=1.0:0.0
# Use Psy-optimizations (boolean)
#sout-x26410b-psy=1
# H.264 level (string)
#sout-x26410b-level=0
# H.264 profile (string)
#sout-x26410b-profile=high
# Interlaced mode (boolean)
#sout-x26410b-interlaced=0
# Frame packing (integer)
#sout-x26410b-frame-packing=-1
# Force number of slices per frame (integer)
#sout-x26410b-slices=0
# Limit the size of each slice in bytes (integer)
#sout-x26410b-slice-max-size=0
# Limit the size of each slice in macroblocks (integer)
#sout-x26410b-slice-max-mbs=0
# HRD-timing information (string)
#sout-x26410b-hrd=none
# Set QP (integer)
#sout-x26410b-qp=-1
# Quality-based VBR (integer)
#sout-x26410b-crf=23
# Min QP (integer)
#sout-x26410b-qpmin=10
# Max QP (integer)
#sout-x26410b-qpmax=51
# Max QP step (integer)
#sout-x26410b-qpstep=4
# Average bitrate tolerance (float)
#sout-x26410b-ratetol=1.000000
# Max local bitrate (integer)
#sout-x26410b-vbv-maxrate=0
# VBV buffer (integer)
#sout-x26410b-vbv-bufsize=0
# Initial VBV buffer occupancy (float)
#sout-x26410b-vbv-init=0.900000
# QP factor between I and P (float)
#sout-x26410b-ipratio=1.400000
# QP factor between P and B (float)
#sout-x26410b-pbratio=1.300000
# QP difference between chroma and luma (integer)
#sout-x26410b-chroma-qp-offset=0
# Multipass ratecontrol (integer)
#sout-x26410b-pass=0
# QP curve compression (float)
#sout-x26410b-qcomp=0.600000
# Reduce fluctuations in QP (float)
#sout-x26410b-cplxblur=20.000000
# Reduce fluctuations in QP (float)
#sout-x26410b-qblur=0.500000
# How AQ distributes bits (integer)
#sout-x26410b-aq-mode=1
# Strength of AQ (float)
#sout-x26410b-aq-strength=1.000000
# Partitions to consider (string)
#sout-x26410b-partitions=normal
# Direct MV prediction mode (string)
#sout-x26410b-direct=spatial
# Direct prediction size (integer)
#sout-x26410b-direct-8x8=1
# Weighted prediction for B-frames (boolean)
#sout-x26410b-weightb=1
# Weighted prediction for P-frames (integer)
#sout-x26410b-weightp=2
# Integer pixel motion estimation method (string)
#sout-x26410b-me=hex
# Maximum motion vector search range (integer)
#sout-x26410b-merange=16
# Maximum motion vector length (integer)
#sout-x26410b-mvrange=-1
# Minimum buffer space between threads (integer)
#sout-x26410b-mvrange-thread=-1
# Subpixel motion estimation and partition decision quality (integer)
#sout-x26410b-subme=7
# Decide references on a per partition basis (boolean)
#sout-x26410b-mixed-refs=1
# Chroma in motion estimation (boolean)
#sout-x26410b-chroma-me=1
# Adaptive spatial transform size (boolean)
#sout-x26410b-8x8dct=1
# Trellis RD quantization (integer)
#sout-x26410b-trellis=1
# Framecount to use on frametype lookahead (integer)
#sout-x26410b-lookahead=40
# Use Periodic Intra Refresh (boolean)
#sout-x26410b-intra-refresh=0
# Use mb-tree ratecontrol (boolean)
#sout-x26410b-mbtree=1
# Early SKIP detection on P-frames (boolean)
#sout-x26410b-fast-pskip=1
# Coefficient thresholding on P-frames (boolean)
#sout-x26410b-dct-decimate=1
# Noise reduction (integer)
#sout-x26410b-nr=0
# Inter luma quantization deadzone (integer)
#sout-x26410b-deadzone-inter=21
# Intra luma quantization deadzone (integer)
#sout-x26410b-deadzone-intra=11
# Non-deterministic optimizations when threaded (boolean)
#sout-x26410b-non-deterministic=0
# CPU optimizations (boolean)
#sout-x26410b-asm=1
# PSNR computation (boolean)
#sout-x26410b-psnr=0
# SSIM computation (boolean)
#sout-x26410b-ssim=0
# Quiet mode (boolean)
#sout-x26410b-quiet=0
# SPS and PPS id numbers (integer)
#sout-x26410b-sps-id=0
# Access unit delimiters (boolean)
#sout-x26410b-aud=0
# Statistics (boolean)
#sout-x26410b-verbose=0
# Filename for 2 pass stats file (string)
#sout-x26410b-stats=x264_2pass.log
# Default preset setting used (string)
#sout-x26410b-preset=
# Default tune setting used (string)
#sout-x26410b-tune=
# x264 advanced options (string)
#sout-x26410b-options=
[a52] # ATSC A/52 (AC-3) audio decoder
# A/52 dynamic range compression (boolean)
#a52-dynrng=1
[x264] # H.264/MPEG-4 Part 10/AVC encoder (x264)
# Maximum GOP size (integer)
#sout-x264-keyint=250
# Minimum GOP size (integer)
#sout-x264-min-keyint=25
# Use recovery points to close GOPs (boolean)
#sout-x264-opengop=0
# Enable compatibility hacks for Blu-ray support (boolean)
#sout-x264-bluray-compat=0
# Extra I-frames aggressivity (integer)
#sout-x264-scenecut=40
# B-frames between I and P (integer)
#sout-x264-bframes=3
# Adaptive B-frame decision (integer)
#sout-x264-b-adapt=1
# Influence (bias) B-frames usage (integer)
#sout-x264-b-bias=0
# Keep some B-frames as references (string)
#sout-x264-bpyramid=normal
# CABAC (boolean)
#sout-x264-cabac=1
# Use fullrange instead of TV colorrange (boolean)
#sout-x264-fullrange=0
# Number of reference frames (integer)
#sout-x264-ref=3
# Skip loop filter (boolean)
#sout-x264-nf=0
# Loop filter AlphaC0 and Beta parameters alpha:beta (string)
#sout-x264-deblock=0:0
# Strength of psychovisual optimization, default is "1.0:0.0" (string)
#sout-x264-psy-rd=1.0:0.0
# Use Psy-optimizations (boolean)
#sout-x264-psy=1
# H.264 level (string)
#sout-x264-level=0
# H.264 profile (string)
#sout-x264-profile=high
# Interlaced mode (boolean)
#sout-x264-interlaced=0
# Frame packing (integer)
#sout-x264-frame-packing=-1
# Force number of slices per frame (integer)
#sout-x264-slices=0
# Limit the size of each slice in bytes (integer)
#sout-x264-slice-max-size=0
# Limit the size of each slice in macroblocks (integer)
#sout-x264-slice-max-mbs=0
# HRD-timing information (string)
#sout-x264-hrd=none
# Set QP (integer)
#sout-x264-qp=-1
# Quality-based VBR (integer)
#sout-x264-crf=23
# Min QP (integer)
#sout-x264-qpmin=10
# Max QP (integer)
#sout-x264-qpmax=51
# Max QP step (integer)
#sout-x264-qpstep=4
# Average bitrate tolerance (float)
#sout-x264-ratetol=1.000000
# Max local bitrate (integer)
#sout-x264-vbv-maxrate=0
# VBV buffer (integer)
#sout-x264-vbv-bufsize=0
# Initial VBV buffer occupancy (float)
#sout-x264-vbv-init=0.900000
# QP factor between I and P (float)
#sout-x264-ipratio=1.400000
# QP factor between P and B (float)
#sout-x264-pbratio=1.300000
# QP difference between chroma and luma (integer)
#sout-x264-chroma-qp-offset=0
# Multipass ratecontrol (integer)
#sout-x264-pass=0
# QP curve compression (float)
#sout-x264-qcomp=0.600000
# Reduce fluctuations in QP (float)
#sout-x264-cplxblur=20.000000
# Reduce fluctuations in QP (float)
#sout-x264-qblur=0.500000
# How AQ distributes bits (integer)
#sout-x264-aq-mode=1
# Strength of AQ (float)
#sout-x264-aq-strength=1.000000
# Partitions to consider (string)
#sout-x264-partitions=normal
# Direct MV prediction mode (string)
#sout-x264-direct=spatial
# Direct prediction size (integer)
#sout-x264-direct-8x8=1
# Weighted prediction for B-frames (boolean)
#sout-x264-weightb=1
# Weighted prediction for P-frames (integer)
#sout-x264-weightp=2
# Integer pixel motion estimation method (string)
#sout-x264-me=hex
# Maximum motion vector search range (integer)
#sout-x264-merange=16
# Maximum motion vector length (integer)
#sout-x264-mvrange=-1
# Minimum buffer space between threads (integer)
#sout-x264-mvrange-thread=-1
# Subpixel motion estimation and partition decision quality (integer)
#sout-x264-subme=7
# Decide references on a per partition basis (boolean)
#sout-x264-mixed-refs=1
# Chroma in motion estimation (boolean)
#sout-x264-chroma-me=1
# Adaptive spatial transform size (boolean)
#sout-x264-8x8dct=1
# Trellis RD quantization (integer)
#sout-x264-trellis=1
# Framecount to use on frametype lookahead (integer)
#sout-x264-lookahead=40
# Use Periodic Intra Refresh (boolean)
#sout-x264-intra-refresh=0
# Use mb-tree ratecontrol (boolean)
#sout-x264-mbtree=1
# Early SKIP detection on P-frames (boolean)
#sout-x264-fast-pskip=1
# Coefficient thresholding on P-frames (boolean)
#sout-x264-dct-decimate=1
# Noise reduction (integer)
#sout-x264-nr=0
# Inter luma quantization deadzone (integer)
#sout-x264-deadzone-inter=21
# Intra luma quantization deadzone (integer)
#sout-x264-deadzone-intra=11
# Non-deterministic optimizations when threaded (boolean)
#sout-x264-non-deterministic=0
# CPU optimizations (boolean)
#sout-x264-asm=1
# PSNR computation (boolean)
#sout-x264-psnr=0
# SSIM computation (boolean)
#sout-x264-ssim=0
# Quiet mode (boolean)
#sout-x264-quiet=0
# SPS and PPS id numbers (integer)
#sout-x264-sps-id=0
# Access unit delimiters (boolean)
#sout-x264-aud=0
# Statistics (boolean)
#sout-x264-verbose=0
# Filename for 2 pass stats file (string)
#sout-x264-stats=x264_2pass.log
# Default preset setting used (string)
#sout-x264-preset=
# Default tune setting used (string)
#sout-x264-tune=
# x264 advanced options (string)
#sout-x264-options=
[cc] # Closed Captions decoder
# Opacity (boolean)
#cc-opaque=1
[svcdsub] # Philips OGT (SVCD subtitle) decoder
[vorbis] # Vorbis audio decoder
# Encoding quality (integer)
#sout-vorbis-quality=0
# Maximum encoding bitrate (integer)
#sout-vorbis-max-bitrate=0
# Minimum encoding bitrate (integer)
#sout-vorbis-min-bitrate=0
# CBR encoding (boolean)
#sout-vorbis-cbr=0
[subsusf] # USF subtitles decoder
# Formatted Subtitles (boolean)
#subsdec-formatted=1
[speex] # Speex audio decoder
# Mode (integer)
#sout-speex-mode=0
# Encoding complexity (integer)
#sout-speex-complexity=3
# CBR encoding (boolean)
#sout-speex-cbr=0
# Encoding quality (float)
#sout-speex-quality=8.000000
# Maximal bitrate (integer)
#sout-speex-max-bitrate=0
# Voice activity detection (boolean)
#sout-speex-vad=1
# Discontinuous Transmission (boolean)
#sout-speex-dtx=0
[svgdec] # SVG video decoder
# Image width (integer)
#svg-width=-1
# Image height (integer)
#svg-height=-1
# Scale factor (float)
#svg-scale=-1.000000
[dvbsub] # DVB subtitles decoder
# Subpicture position (integer)
#dvbsub-position=8
# Decoding X coordinate (integer)
#dvbsub-x=-1
# Decoding Y coordinate (integer)
#dvbsub-y=-1
# Encoding X coordinate (integer)
#sout-dvbsub-x=-1
# Encoding Y coordinate (integer)
#sout-dvbsub-y=-1
[bridge] # Bridge stream output
# ID (integer)
#sout-bridge-out-id=0
# Destination bridge-in name (string)
#sout-bridge-out-in-name=default
# Delay (integer)
#sout-bridge-in-delay=0
# ID Offset (integer)
#sout-bridge-in-id-offset=8192
# Name of current instance (string)
#sout-bridge-in-name=default
# Fallback to placeholder stream when out of data (boolean)
#sout-bridge-in-placeholder=0
# Placeholder delay (integer)
#sout-bridge-in-placeholder-delay=200
# Wait for I frame before toggling placeholder (boolean)
#sout-bridge-in-placeholder-switch-on-iframe=1
[stream_out_transcode] # Transcode stream output
# Video encoder (string)
#sout-transcode-venc=
# Destination video codec (string)
#sout-transcode-vcodec=
# Video bitrate (integer)
#sout-transcode-vb=0
# Video scaling (float)
#sout-transcode-scale=0.000000
# Video frame-rate (string)
#sout-transcode-fps=
# Deinterlace video (boolean)
#sout-transcode-deinterlace=0
# Deinterlace module (string)
#sout-transcode-deinterlace-module=deinterlace
# Video width (integer)
#sout-transcode-width=0
# Video height (integer)
#sout-transcode-height=0
# Maximum video width (integer)
#sout-transcode-maxwidth=0
# Maximum video height (integer)
#sout-transcode-maxheight=0
# Video filter (string)
#sout-transcode-vfilter=
# Audio encoder (string)
#sout-transcode-aenc=
# Destination audio codec (string)
#sout-transcode-acodec=
# Audio bitrate (integer)
#sout-transcode-ab=96
# Audio language (string)
#sout-transcode-alang=
# Audio channels (integer)
#sout-transcode-channels=0
# Audio sample rate (integer)
#sout-transcode-samplerate=0
# Audio filter (string)
#sout-transcode-afilter=
# Subtitle encoder (string)
#sout-transcode-senc=
# Destination subtitle codec (string)
#sout-transcode-scodec=
# Destination subtitle codec (boolean)
#sout-transcode-soverlay=0
# Overlays (string)
#sout-transcode-sfilter=
# Number of threads (integer)
#sout-transcode-threads=0
# Picture pool size (integer)
#sout-transcode-pool-size=10
# High priority (boolean)
#sout-transcode-high-priority=0
[stream_out_chromecast] # Chromecast stream output
# ? (string)
#sout-chromecast-ip=
# ? (integer)
#sout-chromecast-port=8009
# ? (boolean)
#sout-chromecast-video=1
# HTTP port (integer)
#sout-chromecast-http-port=8010
# Performance warning (integer)
#sout-chromecast-show-perf-warning=1
# Enable Audio passthrough (boolean)
#sout-chromecast-audio-passthrough=0
# Conversion quality (integer)
#sout-chromecast-conversion-quality=1
[setid] # Change the id of an elementary stream
# Elementary Stream ID (integer)
#sout-setid-id=0
# New ES ID (integer)
#sout-setid-new-id=0
# Elementary Stream ID (integer)
#sout-setlang-id=0
# Language (string)
#sout-setlang-lang=eng
[stats] # Writes statistic info about stream
# Output file (string)
#sout-stats-output=
# Prefix to show on output line (string)
#sout-stats-prefix=stats
[record] # Record stream output
# Destination prefix (string)
#sout-record-dst-prefix=
[delay] # Delay a stream
# Elementary Stream ID (integer)
#sout-delay-id=0
# Delay of the ES (ms) (integer)
#sout-delay-delay=0
[display] # Display stream output
# Enable audio (boolean)
#sout-display-audio=1
# Enable video (boolean)
#sout-display-video=1
# Delay (ms) (integer)
#sout-display-delay=100
[smem] # Stream output to memory buffer
# Time Synchronized output (boolean)
#sout-smem-time-sync=1
[es] # Elementary stream output
# Output access method (string)
#sout-es-access=
# Output muxer (string)
#sout-es-mux=
# Output URL (string)
#sout-es-dst=
# Audio output access method (string)
#sout-es-access-audio=
# Audio output muxer (string)
#sout-es-mux-audio=
# Audio output URL (string)
#sout-es-dst-audio=
# Video output access method (string)
#sout-es-access-video=
# Video output muxer (string)
#sout-es-mux-video=
# Video output URL (string)
#sout-es-dst-video=
[stream_out_rtp] # RTP stream output
# Destination (string)
#sout-rtp-dst=
# SDP (string)
#sout-rtp-sdp=
# Muxer (string)
#sout-rtp-mux=
# SAP announcing (boolean)
#sout-rtp-sap=0
# Session name (string)
#sout-rtp-name=
# Session category (string)
#sout-rtp-cat=
# Session description (string)
#sout-rtp-description=
# Session URL (string)
#sout-rtp-url=
# Session email (string)
#sout-rtp-email=
# Transport protocol (string)
#sout-rtp-proto=udp
# Port (integer)
#sout-rtp-port=5004
# Audio port (integer)
#sout-rtp-port-audio=0
# Video port (integer)
#sout-rtp-port-video=0
# Hop limit (TTL) (integer)
#sout-rtp-ttl=-1
# RTP/RTCP multiplexing (boolean)
#sout-rtp-rtcp-mux=0
# Caching value (ms) (integer)
#sout-rtp-caching=300
# SRTP key (hexadecimal) (string)
#sout-rtp-key=
# SRTP salt (hexadecimal) (string)
#sout-rtp-salt=
# MP4A LATM (boolean)
#sout-rtp-mp4a-latm=0
# RTSP session timeout (s) (integer)
#rtsp-timeout=60
# Username (string)
#sout-rtsp-user=
# Password (string)
#sout-rtsp-pwd=
[mosaic_bridge] # Mosaic bridge stream output
# ID (string)
#sout-mosaic-bridge-id=Id
# Video width (integer)
#sout-mosaic-bridge-width=0
# Video height (integer)
#sout-mosaic-bridge-height=0
# Sample aspect ratio (string)
#sout-mosaic-bridge-sar=1:1
# Image chroma (string)
#sout-mosaic-bridge-chroma=
# Video filter (string)
#sout-mosaic-bridge-vfilter=
# Transparency (integer)
#sout-mosaic-bridge-alpha=255
# X offset (integer)
#sout-mosaic-bridge-x=-1
# Y offset (integer)
#sout-mosaic-bridge-y=-1
[stream_out_standard] # Standard stream output
# Output access method (string)
#sout-standard-access=
# Output muxer (string)
#sout-standard-mux=
# Output destination (string)
#sout-standard-dst=
# Address to bind to (helper setting for dst) (string)
#sout-standard-bind=
# Filename for stream (helper setting for dst) (string)
#sout-standard-path=
# SAP announcing (boolean)
#sout-standard-sap=0
# Session name (string)
#sout-standard-name=
# Session description (string)
#sout-standard-description=
# Session URL (string)
#sout-standard-url=
# Session email (string)
#sout-standard-email=
[file] # Secrets are stored on a file without any encryption
# ? (string)
#keystore-file=
[logo] # Logo sub source
# Logo filenames (string)
#logo-file=
# X coordinate (integer)
#logo-x=-1
# Y coordinate (integer)
#logo-y=-1
# Logo individual image time in ms (integer)
#logo-delay=1000
# Logo animation # of loops (integer)
#logo-repeat=-1
# Opacity of the logo (integer)
#logo-opacity=255
# Logo position (integer)
#logo-position=-1
[subsdelay] # Subtitle delay
# Delay calculation mode (integer)
#subsdelay-mode=1
# Calculation factor (float)
#subsdelay-factor=2.000000
# Maximum overlapping subtitles (integer)
#subsdelay-overlap=3
# Minimum alpha value (integer)
#subsdelay-min-alpha=70
# Interval between two disappearances (integer)
#subsdelay-min-stops=1000
# Interval between appearance and disappearance (integer)
#subsdelay-min-start-stop=1000
# Interval between disappearance and appearance (integer)
#subsdelay-min-stop-start=1000
[marq] # Marquee display
# Text (string)
#marq-marquee=VLC
# Text file (string)
#marq-file=
# X offset (integer)
#marq-x=0
# Y offset (integer)
#marq-y=0
# Marquee position (integer)
#marq-position=-1
# Opacity (integer)
#marq-opacity=255
# Color (integer)
#marq-color=16777215
# Font size, pixels (integer)
#marq-size=0
# Timeout (integer)
#marq-timeout=0
# Refresh period in ms (integer)
#marq-refresh=1000
[remoteosd] # Remote-OSD over VNC
# VNC Host (string)
#rmtosd-host=myvdr
# VNC Port (integer)
#rmtosd-port=20001
# VNC Password (string)
#rmtosd-password=
# VNC poll interval (integer)
#rmtosd-update=1000
# VNC polling (boolean)
#rmtosd-vnc-polling=0
# Mouse events (boolean)
#rmtosd-mouse-events=0
# Key events (boolean)
#rmtosd-key-events=0
# Alpha transparency value (default 255) (integer)
#rmtosd-alpha=255
[rss] # RSS and Atom feed display
# Feed URLs (string)
#rss-urls=
# X offset (integer)
#rss-x=0
# Y offset (integer)
#rss-y=0
# Text position (integer)
#rss-position=-1
# Opacity (integer)
#rss-opacity=255
# Color (integer)
#rss-color=16777215
# Font size, pixels (integer)
#rss-size=0
# Speed of feeds (integer)
#rss-speed=100000
# Max length (integer)
#rss-length=60
# Refresh time (integer)
#rss-ttl=1800
# Feed images (boolean)
#rss-images=1
# Title display mode (integer)
#rss-title=-1
[audiobargraph_v] # Audio Bar Graph Video sub source
# X coordinate (integer)
#audiobargraph_v-x=0
# Y coordinate (integer)
#audiobargraph_v-y=0
# Transparency of the bargraph (integer)
#audiobargraph_v-transparency=255
# Bargraph position (integer)
#audiobargraph_v-position=-1
# Bar width in pixel (integer)
#audiobargraph_v-barWidth=10
# Bar Height in pixel (integer)
#audiobargraph_v-barHeight=400
[mosaic] # Mosaic video sub source
# Transparency (integer)
#mosaic-alpha=255
# Height (integer)
#mosaic-height=100
# Width (integer)
#mosaic-width=100
# Mosaic alignment (integer)
#mosaic-align=5
# Top left corner X coordinate (integer)
#mosaic-xoffset=0
# Top left corner Y coordinate (integer)
#mosaic-yoffset=0
# Border width (integer)
#mosaic-borderw=0
# Border height (integer)
#mosaic-borderh=0
# Positioning method (integer)
#mosaic-position=0
# Number of rows (integer)
#mosaic-rows=2
# Number of columns (integer)
#mosaic-cols=2
# Keep aspect ratio (boolean)
#mosaic-keep-aspect-ratio=0
# Keep original size (boolean)
#mosaic-keep-picture=0
# Elements order (string)
#mosaic-order=
# Offsets in order (string)
#mosaic-offsets=
# Delay (integer)
#mosaic-delay=0
[dynamicoverlay] # Dynamic video overlay
# Input FIFO (string)
#overlay-input=
# Output FIFO (string)
#overlay-output=
[xcb_x11] # X11 video output (XCB)
[xcb_window] # X11 video window (XCB)
# X11 display (string)
#x11-display=
[yuv] # YUV video output
# device, fifo or filename (string)
#yuv-file=stream.yuv
# Chroma used (string)
#yuv-chroma=
# Add a YUV4MPEG2 header (boolean)
#yuv-yuv4mpeg2=0
[flaschen] # Flaschen-Taschen video output
# Flaschen-Taschen display address (string)
#flaschen-display=
# Width (integer)
#flaschen-width=25
# Height (integer)
#flaschen-height=20
[vdummy] # Dummy video output
# Dummy image chroma format (string)
#dummy-chroma=
[vmem] # Video memory output
# Width (integer)
#vmem-width=320
# Height (integer)
#vmem-height=200
# Pitch (integer)
#vmem-pitch=640
# Chroma (string)
#vmem-chroma=RV16
[fb] # GNU/Linux framebuffer video output
# Framebuffer device (string)
#fbdev=/dev/fb0
# Run fb on current tty (boolean)
#fb-tty=1
# Image format (default RGB) (string)
#fb-chroma=
# Framebuffer resolution to use (integer)
#fb-mode=4
# Framebuffer uses hw acceleration (boolean)
#fb-hw-accel=1
[xcb_xv] # XVideo output (XCB)
# XVideo adaptor number (integer)
#xvideo-adaptor=-1
# XVideo format id (integer)
#xvideo-format-id=0
[gl] # OpenGL video output
# OpenGL extension (string)
#gl=
# Open GL/GLES hardware converter (string)
#glconv=
# Rendering intent for color conversion (integer)
#rendering-intent=1
# Display primaries (integer)
#target-prim=0
# Display gamma / transfer function (integer)
#target-trc=0
# Tone-mapping algorithm (integer)
#tone-mapping=3
# Tone-mapping parameter (float)
#tone-mapping-param=0.000000
# Highlight clipped pixels (boolean)
#tone-mapping-warn=0
# Dithering algorithm (integer)
#dither-algo=-1
# Dither depth override (0 = framebuffer depth) (integer)
#dither-depth=0
# Desaturation strength (float)
#desat-strength=0.000000
# Desaturation exponent (float)
#desat-exponent=0.000000
# Desaturation base (float)
#desat-base=0.000000
# Maximum brightness boost (float)
#max-boost=0.000000
[svg] # svg
# SVG template file (string)
#svg-template-file=
[freetype] # Freetype2 font renderer
# Font (string)
freetype-font=Open Sans SemiBold
# Monospace Font (string)
#freetype-monofont=Monospace
# Font size in pixels (integer)
#freetype-fontsize=0
# Relative font size (integer)
#freetype-rel-fontsize=0
# Text opacity (integer)
#freetype-opacity=255
# Text default color (integer)
freetype-color=16776960
# Force bold (boolean)
#freetype-bold=0
# Background opacity (integer)
#freetype-background-opacity=0
# Background color (integer)
#freetype-background-color=0
# Outline opacity (integer)
#freetype-outline-opacity=255
# Outline color (integer)
#freetype-outline-color=0
# Outline thickness (integer)
#freetype-outline-thickness=4
# Shadow opacity (integer)
#freetype-shadow-opacity=128
# Shadow color (integer)
#freetype-shadow-color=0
# Shadow angle (float)
#freetype-shadow-angle=-45.000000
# Shadow distance (float)
#freetype-shadow-distance=0.060000
# Use YUVP renderer (boolean)
#freetype-yuvp=0
# Text direction (integer)
#freetype-text-direction=0
[prefetch] # Stream prefetch filter
# Buffer size (integer)
#prefetch-buffer-size=16384
# Read size (integer)
#prefetch-read-size=16777216
# Seek threshold (integer)
#prefetch-seek-threshold=16384
[amem] # Audio memory output
# Sample format (string)
#amem-format=S16N
# Sample rate (integer)
#amem-rate=44100
# Channels count (integer)
#amem-channels=2
[afile] # File audio output
# Output file (string)
#audiofile-file=audiofile.wav
# Output format (string)
#audiofile-format=s16
# Number of output channels (integer)
#audiofile-channels=0
# Add WAVE header (boolean)
#audiofile-wav=1
[alsa] # ALSA audio output
# Audio output device (string)
#alsa-audio-device=default
# Audio output channels (integer)
#alsa-audio-channels=6
# Software gain (float)
#alsa-gain=1.000000
[audioscrobbler] # Submission of played songs to last.fm
# Username (string)
#lastfm-username=
# Password (string)
#lastfm-password=
# Scrobbler URL (string)
#scrobbler-url=post.audioscrobbler.com
[gnutls] # GNU TLS transport layer security
# Use system trust database (boolean)
#gnutls-system-trust=1
# Trust directory (string)
#gnutls-dir-trust=
# TLS cipher priorities (string)
#gnutls-priorities=NORMAL
[logger] # File logging
[rtsp] # Legacy RTSP VoD server
# MUX for RAW RTSP transport (string)
#rtsp-raw-mux=ts
# Maximum number of connections (integer)
#rtsp-throttle-users=0
# Sets the timeout option in the RTSP session string (integer)
#rtsp-session-timeout=5
[vaapi_filters] # Video Accelerated API filters
# Denoise strength (0-2) (float)
#denoise-sigma=1.000000
[upnp] # Universal Plug'n'Play
# SAT>IP channel list (string)
#satip-channelist=auto
# Custom SAT>IP channel list URL (string)
#satip-channellist-url=
[sap] # Network streams (SAP)
# SAP multicast address (string)
#sap-addr=
# SAP timeout (seconds) (integer)
#sap-timeout=1800
# Try to parse the announce (boolean)
#sap-parse=1
# SAP Strict mode (boolean)
#sap-strict=0
[podcast] # Podcasts
# Podcast URLs list (string)
#podcast-urls=
[core] # core program
# Enable audio (boolean)
#audio=1
# Audio gain (float)
#gain=1.000000
# Audio output volume step (float)
#volume-step=12.800000
# Remember the audio volume (boolean)
#volume-save=1
# Force S/PDIF support (boolean)
#spdif=0
# Force detection of Dolby Surround (integer)
#force-dolby-surround=0
# Stereo audio output mode (integer)
#stereo-mode=0
# Audio desynchronization compensation (integer)
#audio-desync=0
# Replay gain mode (string)
#audio-replay-gain-mode=none
# Replay preamp (float)
#audio-replay-gain-preamp=0.000000
# Default replay gain (float)
#audio-replay-gain-default=-7.000000
# Peak protection (boolean)
#audio-replay-gain-peak-protection=1
# Enable time stretching audio (boolean)
#audio-time-stretch=1
# Audio output module (string)
#aout=
# Media role (string)
#role=video
# Audio filters (string)
#audio-filter=
# Audio visualizations (string)
#audio-visual=none
# Audio resampler (string)
#audio-resampler=
# Enable video (boolean)
#video=1
# Grayscale video output (boolean)
#grayscale=0
# Fullscreen video output (boolean)
#fullscreen=0
# Embedded video (boolean)
#embedded-video=1
# (boolean)
#xlib=1
# Drop late frames (boolean)
#drop-late-frames=1
# Skip frames (boolean)
#skip-frames=1
# Quiet synchro (boolean)
#quiet-synchro=0
# Key press events (boolean)
#keyboard-events=1
# Mouse events (boolean)
#mouse-events=1
# Always on top (boolean)
#video-on-top=0
# Enable wallpaper mode (boolean)
#video-wallpaper=0
# Disable screensaver (boolean)
#disable-screensaver=1
# Show media title on video (boolean)
#video-title-show=1
# Show video title for x milliseconds (integer)
#video-title-timeout=5000
# Position of video title (integer)
#video-title-position=8
# Hide cursor and fullscreen controller after x milliseconds (integer)
#mouse-hide-timeout=1000
# Video snapshot directory (or filename) (string)
#snapshot-path=
# Video snapshot file prefix (string)
#snapshot-prefix=vlcsnap-
# Video snapshot format (string)
#snapshot-format=png
# Display video snapshot preview (boolean)
#snapshot-preview=1
# Use sequential numbers instead of timestamps (boolean)
#snapshot-sequential=0
# Video snapshot width (integer)
#snapshot-width=-1
# Video snapshot height (integer)
#snapshot-height=-1
# Video width (integer)
#width=-1
# Video height (integer)
#height=-1
# Video X coordinate (integer)
#video-x=0
# Video Y coordinate (integer)
#video-y=0
# Video cropping (string)
#crop=
# Custom crop ratios list (string)
#custom-crop-ratios=
# Source aspect ratio (string)
#aspect-ratio=
# Video Auto Scaling (boolean)
#autoscale=1
# Monitor pixel aspect ratio (string)
#monitor-par=
# Custom aspect ratios list (string)
#custom-aspect-ratios=
# Fix HDTV height (boolean)
#hdtv-fix=1
# Window decorations (boolean)
#video-deco=1
# Video title (string)
#video-title=
# Video alignment (integer)
#align=0
# Zoom video (float)
#zoom=1.000000
# Deinterlace (integer)
#deinterlace=-1
# Deinterlace mode (string)
#deinterlace-mode=auto
# Video output module (string)
#vout=
# Video filter module (string)
#video-filter=
# Video splitter module (string)
#video-splitter=
# Enable sub-pictures (boolean)
#spu=1
# On Screen Display (boolean)
#osd=1
# Text rendering module (string)
#text-renderer=
# Use subtitle file (string)
#sub-file=
# Autodetect subtitle files (boolean)
#sub-autodetect-file=1
# Subtitle autodetection fuzziness (integer)
#sub-autodetect-fuzzy=3
# Subtitle autodetection paths (string)
#sub-autodetect-path=./Subtitles, ./subtitles, ./Subs, ./subs
# Force subtitle position (integer)
#sub-margin=0
# Subpictures source module (string)
#sub-source=
# Subpictures filter module (string)
#sub-filter=
# Program (integer)
#program=0
# Programs (string)
#programs=
# Audio track (integer)
#audio-track=-1
# Subtitle track (integer)
#sub-track=-1
# Audio language (string)
#audio-language=
# Subtitle language (string)
sub-language=rus,eng
# Menu language (string)
#menu-language=
# Audio track ID (integer)
#audio-track-id=-1
# Subtitle track ID (integer)
#sub-track-id=-1
# Preferred Closed Captions decoder (integer)
#captions=608
# Preferred video resolution (integer)
#preferred-resolution=-1
# Input repetitions (integer)
#input-repeat=0
# Start time (float)
#start-time=0.000000
# Stop time (float)
#stop-time=0.000000
# Run time (float)
#run-time=0.000000
# Fast seek (boolean)
#input-fast-seek=0
# Playback speed (float)
#rate=1.000000
# Input list (string)
#input-list=
# Input slave (experimental) (string)
#input-slave=
# Bookmarks list for a stream (string)
#bookmarks=
# DVD device (string)
#dvd=/dev/sr0
# VCD device (string)
#vcd=/dev/sr0
# MTU of the network interface (integer)
#mtu=1400
# TCP connection timeout (integer)
#ipv4-timeout=5000
# HTTP server address (string)
#http-host=
# HTTP server port (integer)
#http-port=8080
# HTTPS server port (integer)
#https-port=8443
# RTSP server address (string)
#rtsp-host=
# RTSP server port (integer)
#rtsp-port=554
# HTTP/TLS server certificate (string)
#http-cert=
# HTTP/TLS server private key (string)
#http-key=
# SOCKS server (string)
#socks=
# SOCKS user name (string)
#socks-user=
# SOCKS password (string)
#socks-pwd=
# Title metadata (string)
#meta-title=
# Author metadata (string)
#meta-author=
# Artist metadata (string)
#meta-artist=
# Genre metadata (string)
#meta-genre=
# Copyright metadata (string)
#meta-copyright=
# Description metadata (string)
#meta-description=
# Date metadata (string)
#meta-date=
# URL metadata (string)
#meta-url=
# File caching (ms) (integer)
#file-caching=1000
# Live capture caching (ms) (integer)
#live-caching=300
# Disc caching (ms) (integer)
#disc-caching=300
# Network caching (ms) (integer)
#network-caching=1000
# Clock reference average counter (integer)
#cr-average=40
# Clock synchronisation (integer)
#clock-synchro=-1
# Clock jitter (integer)
#clock-jitter=5000
# Network synchronisation (boolean)
#network-synchronisation=0
# Record directory (string)
#input-record-path=
# Prefer native stream recording (boolean)
#input-record-native=1
# Timeshift directory (string)
#input-timeshift-path=
# Timeshift granularity (integer)
#input-timeshift-granularity=-1
# Change title according to current media (string)
#input-title-format=$Z
# Disable all lua plugins (boolean)
#lua=1
# Preferred decoders list (string)
#codec=
# Preferred encoders list (string)
#encoder=
# Access module (string)
#access=
# Demux module (string)
#demux=any
# Stream filter module (string)
#stream-filter=
# Demux filter module (string)
#demux-filter=
# Default stream output chain (string)
#sout=
# Display while streaming (boolean)
#sout-display=0
# Keep stream output open (boolean)
#sout-keep=0
# Enable streaming of all ES (boolean)
#sout-all=1
# Enable audio stream output (boolean)
#sout-audio=1
# Enable video stream output (boolean)
#sout-video=1
# Enable SPU stream output (boolean)
#sout-spu=1
# Stream output muxer caching (ms) (integer)
#sout-mux-caching=1500
# VLM configuration file (string)
#vlm-conf=
# SAP announcement interval (integer)
#sap-interval=5
# Mux module (string)
#mux=
# Access output module (string)
#access_output=
# Hop limit (TTL) (integer)
#ttl=-1
# Multicast output interface (string)
#miface=
# DiffServ Code Point (integer)
#dscp=0
# Preferred packetizer list (string)
#packetizer=
# VoD server module (string)
#vod-server=
# Use a plugins cache (boolean)
#plugins-cache=1
# Scan for new plugins (boolean)
#plugins-scan=1
# Preferred keystore list (string)
#keystore=
# Allow real-time priority (boolean)
#rt-priority=0
# Adjust VLC priority (integer)
#rt-offset=0
# Play files randomly forever (boolean)
#random=0
# Repeat all (boolean)
#loop=0
# Repeat current item (boolean)
#repeat=0
# Play and exit (boolean)
#play-and-exit=0
# Play and stop (boolean)
#play-and-stop=0
# Play and pause (boolean)
#play-and-pause=0
# Start paused (boolean)
#start-paused=0
# Auto start (boolean)
#playlist-autostart=1
# Pause on audio communication (boolean)
#playlist-cork=1
# Allow only one running instance (boolean)
#one-instance=0
# Use only one instance when started from file manager (boolean)
#one-instance-when-started-from-file=1
# Enqueue items into playlist in one instance mode (boolean)
#playlist-enqueue=0
# Expose media player via D-Bus (boolean)
#dbus=0
# Use media library (boolean)
#media-library=0
# Display playlist tree (boolean)
#playlist-tree=0
# Default stream (string)
#open=
# Automatically preparse items (boolean)
#auto-preparse=1
# Preparsing timeout (integer)
#preparse-timeout=5000
# Allow metadata network access (boolean)
#metadata-network-access=0
# Subdirectory behavior (string)
#recursive=collapse
# Ignored extensions (string)
#ignore-filetypes=m3u,db,nfo,ini,jpg,jpeg,ljpg,gif,png,pgm,pgmyuv,pbm,pam,tga,bmp,pnm,xpm,xcf,pcx,tif,tiff,lbm,sfv,txt,sub,idx,srt,cue,ssa
# Show hidden files (boolean)
#show-hiddenfiles=0
# Services discovery modules (string)
#services-discovery=
# Run as daemon process (boolean)
#daemon=0
# Write process id to file (string)
#pidfile=
# Show advanced options (boolean)
#advanced=0
# Interface interaction (boolean)
#interact=1
# Locally collect statistics (boolean)
#stats=1
# Interface module (string)
#intf=
# Extra interface modules (string)
#extraintf=
# Control interfaces (string)
#control=
# Mouse wheel vertical axis control (integer)
#hotkeys-y-wheel-mode=0
# Mouse wheel horizontal axis control (integer)
#hotkeys-x-wheel-mode=2
# Fullscreen (string)
#global-key-toggle-fullscreen=
# Fullscreen (string)
#key-toggle-fullscreen=f
# Exit fullscreen (string)
#global-key-leave-fullscreen=
# Exit fullscreen (string)
#key-leave-fullscreen=Esc
# Play/Pause (string)
#global-key-play-pause=
# Play/Pause (string)
#key-play-pause=Space Media Play Pause
# Pause only (string)
#global-key-pause=
# Pause only (string)
#key-pause=Browser Stop
# Play only (string)
#global-key-play=
# Play only (string)
#key-play=Browser Refresh
# Faster (string)
#global-key-faster=
# Faster (string)
#key-faster=+
# Slower (string)
#global-key-slower=
# Slower (string)
#key-slower=-
# Normal rate (string)
#global-key-rate-normal=
# Normal rate (string)
#key-rate-normal==
# Faster (fine) (string)
#global-key-rate-faster-fine=
# Faster (fine) (string)
#key-rate-faster-fine=]
# Slower (fine) (string)
#global-key-rate-slower-fine=
# Slower (fine) (string)
#key-rate-slower-fine=[
# Next (string)
#global-key-next=
# Next (string)
#key-next=n Media Next Track
# Previous (string)
#global-key-prev=
# Previous (string)
#key-prev=p Media Prev Track
# Stop (string)
#global-key-stop=
# Stop (string)
#key-stop=s Media Stop
# Position (string)
#global-key-position=
# Position (string)
#key-position=t
# Very short backwards jump (string)
#global-key-jump-extrashort=
# Very short backwards jump (string)
#key-jump-extrashort=Shift+Left
# Very short forward jump (string)
#global-key-jump+extrashort=
# Very short forward jump (string)
#key-jump+extrashort=Shift+Right
# Short backwards jump (string)
#global-key-jump-short=
# Short backwards jump (string)
#key-jump-short=Alt+Left
# Short forward jump (string)
#global-key-jump+short=
# Short forward jump (string)
#key-jump+short=Alt+Right
# Medium backwards jump (string)
#global-key-jump-medium=
# Medium backwards jump (string)
#key-jump-medium=Ctrl+Left
# Medium forward jump (string)
#global-key-jump+medium=
# Medium forward jump (string)
#key-jump+medium=Ctrl+Right
# Long backwards jump (string)
#global-key-jump-long=
# Long backwards jump (string)
#key-jump-long=Ctrl+Alt+Left
# Long forward jump (string)
#global-key-jump+long=
# Long forward jump (string)
#key-jump+long=Ctrl+Alt+Right
# Next frame (string)
#global-key-frame-next=
# Next frame (string)
#key-frame-next=e Browser Next
# Activate (string)
#global-key-nav-activate=
# Activate (string)
#key-nav-activate=Enter
# Navigate up (string)
#global-key-nav-up=
# Navigate up (string)
#key-nav-up=Up
# Navigate down (string)
#global-key-nav-down=
# Navigate down (string)
#key-nav-down=Down
# Navigate left (string)
#global-key-nav-left=
# Navigate left (string)
#key-nav-left=Left
# Navigate right (string)
#global-key-nav-right=
# Navigate right (string)
#key-nav-right=Right
# Go to the DVD menu (string)
#global-key-disc-menu=
# Go to the DVD menu (string)
#key-disc-menu=Shift+m
# Select previous DVD title (string)
#global-key-title-prev=
# Select previous DVD title (string)
#key-title-prev=Shift+o
# Select next DVD title (string)
#global-key-title-next=
# Select next DVD title (string)
#key-title-next=Shift+b
# Select prev DVD chapter (string)
#global-key-chapter-prev=
# Select prev DVD chapter (string)
#key-chapter-prev=Shift+p
# Select next DVD chapter (string)
#global-key-chapter-next=
# Select next DVD chapter (string)
#key-chapter-next=Shift+n
# Quit (string)
#global-key-quit=
# Quit (string)
#key-quit=Ctrl+q
# Volume up (string)
#global-key-vol-up=
# Volume up (string)
#key-vol-up=Ctrl+Up Volume Up
# Volume down (string)
#global-key-vol-down=
# Volume down (string)
#key-vol-down=Ctrl+Down Volume Down
# Mute (string)
#global-key-vol-mute=
# Mute (string)
#key-vol-mute=m Volume Mute
# Subtitle delay up (string)
#global-key-subdelay-up=
# Subtitle delay up (string)
#key-subdelay-up=h
# Subtitle delay down (string)
#global-key-subdelay-down=
# Subtitle delay down (string)
#key-subdelay-down=g
# Subtitle sync / bookmark audio timestamp (string)
#global-key-subsync-markaudio=
# Subtitle sync / bookmark audio timestamp (string)
#key-subsync-markaudio=Shift+h
# Subtitle sync / bookmark subtitle timestamp (string)
#global-key-subsync-marksub=
# Subtitle sync / bookmark subtitle timestamp (string)
#key-subsync-marksub=Shift+j
# Subtitle sync / synchronize audio & subtitle timestamps (string)
#global-key-subsync-apply=
# Subtitle sync / synchronize audio & subtitle timestamps (string)
#key-subsync-apply=Shift+k
# Subtitle sync / reset audio & subtitle synchronization (string)
#global-key-subsync-reset=
# Subtitle sync / reset audio & subtitle synchronization (string)
#key-subsync-reset=Ctrl+Shift+k
# Subtitle position up (string)
#global-key-subpos-up=
# Subtitle position up (string)
#key-subpos-up=
# Subtitle position down (string)
#global-key-subpos-down=
# Subtitle position down (string)
#key-subpos-down=
# Audio delay up (string)
#global-key-audiodelay-up=
# Audio delay up (string)
#key-audiodelay-up=k
# Audio delay down (string)
#global-key-audiodelay-down=
# Audio delay down (string)
#key-audiodelay-down=j
# Cycle audio track (string)
#global-key-audio-track=
# Cycle audio track (string)
#key-audio-track=b
# Cycle through audio devices (string)
#global-key-audiodevice-cycle=
# Cycle through audio devices (string)
#key-audiodevice-cycle=Shift+a
# Cycle subtitle track in reverse order (string)
#global-key-subtitle-revtrack=
# Cycle subtitle track in reverse order (string)
#key-subtitle-revtrack=Alt+v
# Cycle subtitle track (string)
#global-key-subtitle-track=
# Cycle subtitle track (string)
#key-subtitle-track=v
# Toggle subtitles (string)
#global-key-subtitle-toggle=
# Toggle subtitles (string)
#key-subtitle-toggle=Shift+v
# Cycle next program Service ID (string)
#global-key-program-sid-next=
# Cycle next program Service ID (string)
#key-program-sid-next=x
# Cycle previous program Service ID (string)
#global-key-program-sid-prev=
# Cycle previous program Service ID (string)
#key-program-sid-prev=Shift+x
# Cycle source aspect ratio (string)
#global-key-aspect-ratio=
# Cycle source aspect ratio (string)
#key-aspect-ratio=a
# Cycle video crop (string)
#global-key-crop=
# Cycle video crop (string)
#key-crop=c
# Toggle autoscaling (string)
#global-key-toggle-autoscale=
# Toggle autoscaling (string)
#key-toggle-autoscale=o
# Increase scale factor (string)
#global-key-incr-scalefactor=
# Increase scale factor (string)
#key-incr-scalefactor=Alt+o
# Decrease scale factor (string)
#global-key-decr-scalefactor=
# Decrease scale factor (string)
#key-decr-scalefactor=Alt+Shift+o
# Toggle deinterlacing (string)
#global-key-deinterlace=
# Toggle deinterlacing (string)
#key-deinterlace=d
# Cycle deinterlace modes (string)
#global-key-deinterlace-mode=
# Cycle deinterlace modes (string)
#key-deinterlace-mode=Shift+d
# Show controller in fullscreen (string)
#global-key-intf-show=
# Show controller in fullscreen (string)
#key-intf-show=i
# Boss key (string)
#global-key-intf-boss=
# Boss key (string)
#key-intf-boss=
# Context menu (string)
#global-key-intf-popup-menu=
# Context menu (string)
#key-intf-popup-menu=Menu
# Take video snapshot (string)
#global-key-snapshot=
# Take video snapshot (string)
#key-snapshot=Shift+s
# Record (string)
#global-key-record=
# Record (string)
#key-record=Shift+r
# Zoom (string)
#global-key-zoom=
# Zoom (string)
#key-zoom=z
# Un-Zoom (string)
#global-key-unzoom=
# Un-Zoom (string)
#key-unzoom=Shift+z
# Toggle wallpaper mode in video output (string)
#global-key-wallpaper=
# Toggle wallpaper mode in video output (string)
#key-wallpaper=w
# Crop one pixel from the top of the video (string)
#global-key-crop-top=
# Crop one pixel from the top of the video (string)
#key-crop-top=Alt+r
# Uncrop one pixel from the top of the video (string)
#global-key-uncrop-top=
# Uncrop one pixel from the top of the video (string)
#key-uncrop-top=Alt+Shift+r
# Crop one pixel from the left of the video (string)
#global-key-crop-left=
# Crop one pixel from the left of the video (string)
#key-crop-left=Alt+d
# Uncrop one pixel from the left of the video (string)
#global-key-uncrop-left=
# Uncrop one pixel from the left of the video (string)
#key-uncrop-left=Alt+Shift+d
# Crop one pixel from the bottom of the video (string)
#global-key-crop-bottom=
# Crop one pixel from the bottom of the video (string)
#key-crop-bottom=Alt+c
# Uncrop one pixel from the bottom of the video (string)
#global-key-uncrop-bottom=
# Uncrop one pixel from the bottom of the video (string)
#key-uncrop-bottom=Alt+Shift+c
# Crop one pixel from the right of the video (string)
#global-key-crop-right=
# Crop one pixel from the right of the video (string)
#key-crop-right=Alt+f
# Uncrop one pixel from the right of the video (string)
#global-key-uncrop-right=
# Uncrop one pixel from the right of the video (string)
#key-uncrop-right=Alt+Shift+f
# Random (string)
#global-key-random=
# Random (string)
#key-random=r
# Normal/Loop/Repeat (string)
#global-key-loop=
# Normal/Loop/Repeat (string)
#key-loop=l
# Shrink the viewpoint field of view (360°) (string)
#global-key-viewpoint-fov-in=
# Shrink the viewpoint field of view (360°) (string)
#key-viewpoint-fov-in=Page Up
# Expand the viewpoint field of view (360°) (string)
#global-key-viewpoint-fov-out=
# Expand the viewpoint field of view (360°) (string)
#key-viewpoint-fov-out=Page Down
# Roll the viewpoint clockwise (360°) (string)
#global-key-viewpoint-roll-clock=
# Roll the viewpoint clockwise (360°) (string)
#key-viewpoint-roll-clock=
# Roll the viewpoint anti-clockwise (360°) (string)
#global-key-viewpoint-roll-anticlock=
# Roll the viewpoint anti-clockwise (360°) (string)
#key-viewpoint-roll-anticlock=
# 1:4 Quarter (string)
#global-key-zoom-quarter=
# 1:4 Quarter (string)
#key-zoom-quarter=Alt+1
# 1:2 Half (string)
#global-key-zoom-half=
# 1:2 Half (string)
#key-zoom-half=Alt+2
# 1:1 Original (string)
#global-key-zoom-original=
# 1:1 Original (string)
#key-zoom-original=Alt+3
# 2:1 Double (string)
#global-key-zoom-double=
# 2:1 Double (string)
#key-zoom-double=Alt+4
# Very short jump length (integer)
#extrashort-jump-size=3
# Short jump length (integer)
#short-jump-size=10
# Medium jump length (integer)
#medium-jump-size=60
# Long jump length (integer)
#long-jump-size=300
# Set playlist bookmark 1 (string)
#global-key-set-bookmark1=
# Set playlist bookmark 1 (string)
#key-set-bookmark1=Ctrl+F1
# Set playlist bookmark 2 (string)
#global-key-set-bookmark2=
# Set playlist bookmark 2 (string)
#key-set-bookmark2=Ctrl+F2
# Set playlist bookmark 3 (string)
#global-key-set-bookmark3=
# Set playlist bookmark 3 (string)
#key-set-bookmark3=Ctrl+F3
# Set playlist bookmark 4 (string)
#global-key-set-bookmark4=
# Set playlist bookmark 4 (string)
#key-set-bookmark4=Ctrl+F4
# Set playlist bookmark 5 (string)
#global-key-set-bookmark5=
# Set playlist bookmark 5 (string)
#key-set-bookmark5=Ctrl+F5
# Set playlist bookmark 6 (string)
#global-key-set-bookmark6=
# Set playlist bookmark 6 (string)
#key-set-bookmark6=Ctrl+F6
# Set playlist bookmark 7 (string)
#global-key-set-bookmark7=
# Set playlist bookmark 7 (string)
#key-set-bookmark7=Ctrl+F7
# Set playlist bookmark 8 (string)
#global-key-set-bookmark8=
# Set playlist bookmark 8 (string)
#key-set-bookmark8=Ctrl+F8
# Set playlist bookmark 9 (string)
#global-key-set-bookmark9=
# Set playlist bookmark 9 (string)
#key-set-bookmark9=Ctrl+F9
# Set playlist bookmark 10 (string)
#global-key-set-bookmark10=
# Set playlist bookmark 10 (string)
#key-set-bookmark10=Ctrl+F10
# Play playlist bookmark 1 (string)
#global-key-play-bookmark1=
# Play playlist bookmark 1 (string)
#key-play-bookmark1=F1
# Play playlist bookmark 2 (string)
#global-key-play-bookmark2=
# Play playlist bookmark 2 (string)
#key-play-bookmark2=F2
# Play playlist bookmark 3 (string)
#global-key-play-bookmark3=
# Play playlist bookmark 3 (string)
#key-play-bookmark3=F3
# Play playlist bookmark 4 (string)
#global-key-play-bookmark4=
# Play playlist bookmark 4 (string)
#key-play-bookmark4=F4
# Play playlist bookmark 5 (string)
#global-key-play-bookmark5=
# Play playlist bookmark 5 (string)
#key-play-bookmark5=F5
# Play playlist bookmark 6 (string)
#global-key-play-bookmark6=
# Play playlist bookmark 6 (string)
#key-play-bookmark6=F6
# Play playlist bookmark 7 (string)
#global-key-play-bookmark7=
# Play playlist bookmark 7 (string)
#key-play-bookmark7=F7
# Play playlist bookmark 8 (string)
#global-key-play-bookmark8=
# Play playlist bookmark 8 (string)
#key-play-bookmark8=F8
# Play playlist bookmark 9 (string)
#global-key-play-bookmark9=
# Play playlist bookmark 9 (string)
#key-play-bookmark9=F9
# Play playlist bookmark 10 (string)
#global-key-play-bookmark10=
# Play playlist bookmark 10 (string)
#key-play-bookmark10=F10
# Clear the playlist (string)
#global-key-clear-playlist=
# Clear the playlist (string)
#key-clear-playlist=Ctrl+w
# Reset subtitles text scale (string)
#global-key-subtitle-text-scale-normal=
# Reset subtitles text scale (string)
#key-subtitle-text-scale-normal=Ctrl+0
# Scale down subtitles text (string)
#global-key-subtitle-text-scale-up=
# Scale down subtitles text (string)
#key-subtitle-text-scale-up=Ctrl+Mouse Wheel Up
# Scale up subtitles text (string)
#global-key-subtitle-text-scale-down=
# Scale up subtitles text (string)
#key-subtitle-text-scale-down=Ctrl+Mouse Wheel Down
# Playlist bookmark 1 (string)
#bookmark1=
# Playlist bookmark 2 (string)
#bookmark2=
# Playlist bookmark 3 (string)
#bookmark3=
# Playlist bookmark 4 (string)
#bookmark4=
# Playlist bookmark 5 (string)
#bookmark5=
# Playlist bookmark 6 (string)
#bookmark6=
# Playlist bookmark 7 (string)
#bookmark7=
# Playlist bookmark 8 (string)
#bookmark8=
# Playlist bookmark 9 (string)
#bookmark9=
# Playlist bookmark 10 (string)
#bookmark10=